ANSI——美国国家标准（英中对照翻译）目录1

编号	中文名称	英文名称
ANSI (NFPA)T 2.25.1 R 2-2005	气压传动.工业机械的系统标准.对ISO 4414-1998的补充.气压传动.与系统相关的一般规则
ANSI 1-1990	小型锅炉的测试程序	Mini-Rail Boiler Testing Procedure
ANSI 13-1988	盒式录像磁带.2英寸四路磁带(SMPTE)	Video Recording-Cartridge Spools - 2-in Quadruplex Tape (SMPTE)
ANSI 5609-2004	可转位刀片用镗杆.尺寸
ANSI 5609-2004	可转位刀片用镗杆.尺寸	(Boring bars for indexable inserts - Dimensions )
ANSI A 10.12-1998	挖掘的安全要求	Safety Requirements for Excavation
ANSI A 10.13-2001	钢结构构件的安全要求	Safety Requirements for Steel Erection
ANSI A 10.15-1995	建造和拆除操作.挖沟的安全要求	Construction and Demolition Operations - Dredging, Safety Requirements for
ANSI A 10.16-1995	建造和拆除操作.竖井,隧道,藻井的安全要求	Construction and Demolition Operations - Safety Requirements for Tunnels, Shafts, and Caissons
ANSI A 10.17-1997	热混合沥青建筑的安全操作规程	Safe Operating Practices for Hot Mix Asphalt (HMA) Construction
ANSI A 10.18-1996	建造和拆除操作.临时地板孔墙开孔和楼梯口及其他无保护边界的安全要求	Construction and Demolition Operations - Safety Requirements for Temporary Floor Holes, Wall Openings, Stairways and Other Unprotected Edges
ANSI A 10.31-1995	建造和拆除操作.挖掘起重机的安全要求,定义和规范	Construction and Demolition Operations - Safety Requirements, Definitions, and Specifications for Digger Derricks
ANSI A 10.34-2001	施工现场及其邻近的公众的保护	Protection of the Public on and Adjacent to Construction Sites
ANSI A 10.37-1996	建造和拆除操作.在建造和拆除操作中的砂砾系统	Construction and Demolition Operations - Debris Net Systems Used During Construction and Demolition Operations
ANSI A 10.39-1996	健康审核程序的结构安全	Construction Safety and Health Audit Program
ANSI A 10.42-2000	建筑企业的施工资格和责任	Rigging Qualifications and Responsibilities in the Construction Industry
ANSI A 10.7-1998	建造和拆除.商业用爆炸和炸药.运输,储存,处理和使用的安全要求	Construction and Demolition - Commercial Explosives and Blasting Agents - Safety Requirements for Transportation, Storage, Handling and Use
ANSI A 10.9-1997	建造和拆除操作.混凝土和砖石工程	Construction and Demolition Operations - Concrete and Masonry Work
ANSI A 108.10-1992	灰浆固定规范	Specifications for Installation of Grout in Tilework (included in ANSI A108.1-1992)
ANSI A 108.11-1992	粘结性衬垫部件的内部装修规范	Specifications for Inior Installations of Cementitious Backer Units (included in ANSI A108.1-1992)
ANSI A 108.1a-1992	用波特兰水泥灰浆用湿固定法安装陶瓷砖的规范	Specifications for Installation of Ceramic Tile in the Wet-Set Method, with Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 108.1b-1992	用干的或渍浆的波特兰水泥灰浆在弯曲的波特兰水泥灰浆凝固床上安装陶瓷砖的规范	Specifications for Installation of Ceramic Tile on a Cured Portland Cement Mortar Setting Bed with Dry-Set or Latex Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 108.1c-1992	签订合同者的选择规范.用干的或渍浆的波特兰水泥灰浆在弯曲的波特兰水泥灰浆床上安装陶瓷砖或用波特兰混凝土灰浆用湿固定方法安装陶瓷砖
ANSI A 108.4-1992	用有机粘结剂或水可清洗的环氧树脂陶瓷砖粘结剂的陶瓷砖的安装规范	Specifications for Installation of Ceramic Tile with Organic Adhesives or Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992)
ANSI A 108.5-1992	用干固定的波特兰水泥灰浆或渍浆的波特兰水泥灰浆的陶瓷砖的安装规范	Specifications for Installation of Ceramic Tile with Dry-Set Portland Cement Mortar or Latex Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 108.6-1992	用耐化学药品的水可清洗釉面砖粘结的和环氧树脂的陶瓷磁砖安装规范	Specifications for Installation of Ceramic Tile with Tile with Chemical Resistant, Water Cleanable Tile Setting and Grouting Epoxy (included in ANSI A108.1-1992)
ANSI A 108.8-1992	用耐化学药品的灰浆和灌浆安装陶瓷砖的规范	Specifications for Installation of Ceramic Tile with Chemical Resistant Furan Mortar and Grout (included in ANSI A108.1-1992)
ANSI A 108.9-1992	用改良的树脂乳化的灰浆和灌浆的陶瓷砖的安装规范	Specifications for Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout (included in ANSI A108.1-1992)
ANSI A 118.1-1992	干固定的波特兰水泥灰浆规范	Specifications for Dry-Set Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 118.2-1992	导电的干固定的波特兰水泥灰浆规范	Specifications for Conductive Dry-Set Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 118.3-1992	耐化学药品的水可清洗的磁砖安装和灌浆环氧树脂和水可清洗的固定磁砖粘结剂规范	Specifications for Chemical Resistant, Water Cleanable Tile-Setting and Grouting Epoxy and Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992)
ANSI A 118.4-1992	浸浆波特兰水泥灰浆规范	Specifications for Latex Portland Cement Mortar (included in ANSI A108.1-1992)
ANSI A 118.5-1992	磁砖安装用耐化学药品的树脂灰浆规范	Specifications for Chemical Resistant Furan Resin Mortars and Grouts for Tile Installation (included in ANSI A108.1-1992)
ANSI A 118.6-1992	陶瓷砖灌浆规范	Specifications for Ceramic Tile Grouts (included in ANSI A108.1-1992)
ANSI A 118.8-1992	改良环氧树脂乳化灰浆灌浆规范	Specifications for Modified Epoxy Emulsion Mortar Grout (included in ANSI A108.1-1992)
ANSI A 118.9-1992	粘结性衬垫部件的规范	Specifications for Cementitious Backer Units (included in ANSI A108.1-1992)
ANSI A 119.2-1996	娱乐车辆	Recreational Vehicles
ANSI A 119.4-1996	娱乐车辆的停车和停放场地	Recreational Vehicle Parks and Campgrounds
ANSI A 119.5-1998	停车拖车	Park Trailers
ANSI A 1264.2-2001	行走/工作表面的耐滑性装置	Provision of Slip Resistance on Walking/Working Surfaces
ANSI A 136.1-1992	陶瓷砖安装用有机粘结剂规范	Organic Adhesives for Installation of Ceramic Tile (included in ANSI A108.1-1992)
ANSI A 250.11-2001	推荐的钢机架建造方法	Recommended Erection Instructions for Steel Frames
ANSI A 250.6-1997	标准钢门五金	Hardware on Standard Steel Doors (Reinforcement-Application)
ANSI A 250.7-1997	钢门和钢门框架的命名	Nomenclature for Steel Doors and Steel Door Frames
ANSI A 92.2-2001	车载高架旋转架空装置	Vehicle-Mounted Elevating and Rotating Aerial Devices
ANSI A10.10-1990	建筑业用的临时及便携式采暖器件和设备的安全要求	Safety requirements for temporary and portable space heating devices and equipment used in the construction industry
ANSI A10.11-1989	修建和拆除工作期间用的安全网	Construction and Demolition Operations - Personnel and Debris Nets
ANSI A10.14-1991	供建筑和拆除工作用安全带、装具、绳索、救生索的要求	Construction and demolition operations - Requirements for safety belts, harnesses, lanyards and lifelines for constrution and demolition use
ANSI A10.20-1988	修建和拆除的瓷砖、水磨石和大理石作业时的安全要求	Construction and Demolition - Ceramic Tile, Terrazzo and Marble Work - Safety Requirements
ANSI A10.28-1990	悬吊在起重机或转臂起重机上的工作平台安全要求	Safety requirements for work platforms suspended from cranes or derricks for construction and demolition operations
ANSI A10.3-1995	修建和拆除工作中用的炸药驱动紧固系统的安全要求	Construction and demolition operations - Safety requirements for powder-actuated fastening systems
ANSI A10.32-2004	建设和拆毁工作中防人员跌落的安全要求
ANSI A10.33-1992	多个建筑和拆除工程中的安全、卫生方面的要求	Construction and demolition operations - Safety and health programm - Requirements for multi-employer projects
ANSI A10.4-2004	载人升降机和雇员用电梯的安全要求
ANSI A10.5-1992	运料用升降机的安全要求	Safety requirements for material hoists
ANSI A10.6-1990	拆除工程的安全要求	Safety requirements for demolition operations
ANSI A10.8-1988	修建和拆除工作用的脚手架的安全要求	Construction and Demolition Operations - Scaffolding - Safety Requirements
ANSI A108.1 Reihe-1992	瓷砖铺设的规范	Specifications for the installation of ceramic tile
ANSI A112.14.1-1975	回水阀	Backwater valves
ANSI A112.19.5-1979	厕所水浮筒、水箱及小便池的修整	Trim for water-closet bowls, tanks, and urinals (dimensional standards)
ANSI A118.10-1993	薄状瓷砖和规格石料安装中的载面、粘接、防水层	Load bearing, bonded, waterproof membranes for thin-set ceramic tile and dimension stone installations
ANSI A119.2-2002	娱乐车辆	(Recreational Vehicles )
ANSI A119.5-2005	公园挂车
ANSI A1264.1-1995	楼板、墙壁开口及非居住区的楼梯、围栏类的安全要求	Safety requirements for workplace floor and wall openings, stairs and railing systems
ANSI A135.4-2004	基本的硬质纤维板
ANSI A135.5-2004	预制硬质纤维板嵌板
ANSI A14.3-1992	固定式梯子的安全要求	Ladders - Fixed - Safety requirements
ANSI A14.3-2002	固定梯子的安全要求	(Ladders - Fixed - Safety Requirements )
ANSI A14.4-1992	工地用木梯的安全要求	Safety Requirements for Job-Made Wooden Ladders
ANSI A14.9-2004	吊装暗式爬高系统的安全要求
ANSI A161.2-1979	高压层压案台板的性能标准	Performance standards for fabricated high pressure decorative laminate countertops
ANSI A208.2-1994	室内用中密度纤维板	Medium density fiberboard (MDF)
ANSI A224.1-1990	钢门和门框涂底漆前的钢板表面的试验程序和验收条件	Test procedure and acceptance criteria for prime painted steel surfaces for steel doors and frames
ANSI A250.13-2003	摆动式门组件用防大风暴部件的检验和额定值	(Testing and Rating of Severe Windstorm Resistant Components for Swinging Door Assemblies )
ANSI A250.2-1984	隔热钢门系统的术语	Nomenclature for insulated steel door systems
ANSI A250.4-1994	钢门和金属附件的耐久性的试验程序和验收标准	Test procedure and acceptance criteria for physical endurance for steel doors and hardware reinforcings
ANSI A250.5-1994	钢门、门框和吊钩的加速物理耐久性试验程序	Accelerated physical endurance test procedure for steel doors, frames and frame anchors
ANSI A250.6-2003	标准钢制门五金件(增强型)	(Hardware on Standard Steel Doors (Reinforcement-Application) )
ANSI A250.8-2003	标准钢门和门框的推荐性规范	(Recommended Specifications for Standard Steel Doors and Frames )
ANSI A300 Part 2-2004	树木护理操作.树木、灌木和其它木类植物的维护.标准规程.第2部分:施肥
ANSI A300 Part 4-2002	树木管理培植.树、灌木和其他树木维护.树的防电击设备	(Tree Care Operations - Tree, Shrub and Other Woody Plant Maintenance: Standard Practices - Part 4 - Lightning Protection Installation for Trees )
ANSI A300 Part 5-2005	树木护理操作.乔木、灌木和其他木类植物的养护.标准操作规程(场地规划、开发和施工操作过程中对乔木和灌木的管理)
ANSI A300 Part 6-2005	树木维护用操作.乔木、灌木和其他木本植物的维护.标准实施规程(移栽)
ANSI A300-1995	树木防护.树、灌木和其它木本植物的防护.标准规程	Tree care operations - Tree, shrub and other woody plant maintenance - Standard practices
ANSI ATIS0100001-2004	ETS用户平面安全指南和要求
ANSI ATIS0152100-2005	与ITU-T建议G.711一起使用的包丢失隐蔽
ANSI ATIS0300002-2005	POTS服务试验用XML图解界面
ANSI ATIS0300003-2005	缺陷管理用XML图解界面(故障管理)
ANSI ATIS0300202.a-2005	互连网操作.阐明5.3节呼叫优先策略的灾害状况下公共通信网络的网络管理指南
ANSI ATIS0300276.a-2005	操作、管理、维护和保障.公共通信网络的安全要求:作为阻止有害通信的包过滤附加要求的管理平面用安全要求基线
ANSI ATIS0322000-2005	信息交换用通信业制造商、供应商和相关服务公司的表示
ANSI ATIS0325300-2005	信息交换用定位实体的识别
ANSI ATIS0326600-2005	电信.信息交换.用于北美电信系统的电信电路的识别用结构
ANSI ATIS0326900-2005	电信.信息交换.用于北美电信系统的追踪信息格式的结构和表示
ANSI ATIS0610700a-2005	数字分级.格式规范(虚拟连接和LCAS)
ANSI ATIS0700004-2005	大容量-空分多路存取(HC-SDMA)
ANSI ATIS1000006-2005	信令系统No.7(SS7).应急电信服务(ETS)
ANSI ATIS1000111-2005	信令系统No.7(SS7).信息传输部分(MTP)
ANSI ATIS1000112-2005	信令系统No.7(SS7).信令连接控制部分(SCCP)
ANSI ATIS1000113-2005	信令系统No.7(SS7).综合业务数字网络(ISDN)用户部分
ANSI ATIS1000631-2005	信令系统No.7(SS7).高完成概率(HPC)网络容量
ANSI B 11.3-2002	动力弯板机.制造、维修和使用安全要求	Power Press Brakes, Safety Requirements for the Construction, Care, and Use of
ANSI B 16.18-2001	铸铜合金钎料接头压力配件	Cast Copper Alloy Solder Joint Pressure Fittings
ANSI B 18.16.3M-1982	普通转矩式米制六角螺母和六角法兰螺母的尺寸要求	Nuts and Hex Flange Nuts, Dimensional Requirements for Prevailing-Torque-Type Steel Metric Hex
ANSI B 5.11-1964	多轴钻头用轴头和可调接头	Spindle Noses and Adjustable Adapters for Multiple Spindle Drilling Heads
ANSI B 5.43-1977	组合机床标准	Modular Machine Tool Standards
ANSI B 65.1-1995	安全标准.印刷机系统	Safety Standard - Printing Press Systems
ANSI B 74.16-1995	检验金刚石磨料粒度的尺寸	Checking the Size of Diamond Abrasive Grain
ANSI B 74.18-1996	涂有磨料的某种磨料粒度的等级	Grading of Certain Abrasive Grain on Coated Abrasive Material
ANSI B 74.23-1999	钻石立方体的硼氮磨料的相对晶体强度的测量	Measuring the Relative Crystal Strengths of a Diamond Cubic Boron Nitride Grits
ANSI B 92.1-1996	渐开线花键及其检验.英制	Involute Splines and Inspection, Inch Version
ANSI B 93.10M-1969	方头液动滚筒的静压力额定值法	Static Pressure Rating Methods of Square Head Fluid Power Cylinders
ANSI B 93.35M-1978	液动专用装置的空腔尺寸(英制)	Fluid Power Exclusion Devices (Inch Series), Cavity Dimensions for
ANSI B 93.36M-1973	浮动式金属和非金属液压活塞环槽的尺寸	Floating Type Metallic and Non-Metallic Fluid Power Piston Rings, Groove Dimensions for
ANSI B 94.3-1965	车床和螺旋机械的直的切削片	Straight Cut-Off Blades for Lathes and Screw Machines
ANSI B 94.8-1967	插入式刀形铣刀体	Inserted Blade Milling Cutter Bodies
ANSI B11 TR 1-1993	机床的设计、安装和使用的人机工程导则	Ergonomic guidelines for the design, installation and use of machine tools
ANSI B11.1-1988	机床.机械动力压力机的制造、维护和使用的安全要求	Machine Tools - Mechanical Power Presses - Safety Requirements for Construction, Care and Use
ANSI B11.10-1990	机床.金属锯床的制造、维护和使用的安全要求	Machine Tools - Metal Sawing Machines - Safety Requirements for Construction, Care and Use
ANSI B11.10-2003	金属锯床的制造、维护和使用的安全要求	(Metal Sawing Machines, Safety Requirements for Construction, Care, and Use of )

立即获取免费预算>>>

http://www.leeglee.org/webpages/biaozhunfanyi-gongye/726.html

By WWT at 2008-12. [标准翻译服务]