| 编号 | 中文名称 | 英文名称 |
| ANSI C 29.13-2000 | 绝缘子.组合分布固定型 | Insulators - Composite Distribution Deaded Type |
| ANSI C 29.17-2001 | 绝缘子.复合.线路后置形 | Insulators-Composite-Line Post Type |
| ANSI C 29.6-1996 | 湿态加工的瓷质绝缘子.高电压型 | Wet-Process Porcelain Insulators - High-Voltage Pin Type |
| ANSI C 29.7-1996 | 湿态加工的瓷质绝缘子.高电压线接线柱型 | Wet-Process - Porcelain Insulators - High-Voltage Line-Post Type |
| ANSI C 37.06-2000 | 开关设备.以对称电流为基础设计的AC高压断路器.优选额定值和要求的相关性能 | Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities |
| ANSI C 37.06.1-2000 | 以对称电流为基础设计的标明限用于快速瞬时恢复电压上升时间的高压断路器试用指南 | Trial-Use Guide for High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times (NOT AN AMERICAN NATIONAL STANDARD) |
| ANSI C 37.16-2000 | 低压电力网断路器和AC电力网保护器推荐标准.优选额定值、相关要求和应用 | Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors, Preferred Ratings, Related Requirements and Application Recommendations for |
| ANSI C 37.17-1997 | 交流和一般用途的直流低电压电力线路断路器的跳闸装置 | Trip Devices for AC and General Purpose DC Low-Voltage Power Circuit Breakers |
| ANSI C 37.22-1997 | 用于金属外壳开关设备的室内中等电压开关的相关要求的电容和优先功率 | Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear |
| ANSI C 37.42-1996 | 开关设备.配电断流器和熔断体.规范 | Switchgear - Distribution Cutouts and Fuse Links - Specifications |
| ANSI C 37.54-1997 | 用于金属外壳的开关设备组件的可移动件的室内交流电流高压线路断路器的一致性试验规程 | Conformance Test Procedures for Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies |
| ANSI C 50.41-2000 | 发电站用多相感应马达 | Polyphase Induction Motors for Power Generating Stations |
| ANSI C 57.12.10-1998 | 230 kV 和低于230 kV的变压器,833/958 至8333/10 417 kVA 单相和750/862 至 60 000/80 000/100 000 kVA 三相设备的要求 | Transformers 230 kV and Below, 833/958 through 8333/10 417 kVA Single Phase, and 750/862 through 60 000/80 000/100 000 kVA Three Phase, Requirements for |
| ANSI C 57.12.20-1997 | 变压器.500KVA和小于500KVA的架空型配电变压器:高压34500V及其以下、低压7970V/13800YV及其以下 | Transformers - Overhead-Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34 500 Volts and Below; Low Voltage, 7970/13 800Y Volts and Below |
| ANSI C 57.12.23-1992 | 变压器.带有可分离的绝缘高电压连接器的地下类型的自冷却,单相配电变压器:高电压和低电压 | Transformers - Underground-Type Self-Cooled, Single-Phase Distribution Transformers with Seperable, Insulated High-Voltage Connectors: High Voltage (24 940 GrdY/14 400V and Below) and Low Voltage (240/120V, 167 kVA and Smaller) |
| ANSI C 57.12.24-2000 | 变压器.接地型三相配电变压器, 2500 kVA和更小: 高压34500 Grd Y/19920 V和低于该值,低压480V和低于该值.要求 | Transformers - Underground-Type Three-Phase Distribution Transformers, 2500 kVA and Smaller: High Voltage 34 500 Grd Y/19 920 Volts and Below; Low Voltage, 480 Volts and Below - Requirements |
| ANSI C 57.12.26-1993 | 与可分离绝缘高压连接器一起使用的固定板分离空间型、自冷却、三相配电变压器的要求.高压:34500Grd Y/19920伏特和以下,2500KVA和更小 | Pad-Mounted Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers for Use with Separable Insulated High-Voltage Connectors, High-Voltage, 34 500 Grd Y/19 920 Volts and Below; 2500 kVA and Smaller, Requirements for |
| ANSI C 57.12.28-1999 | 开关设备和变压器. 安装垫片的设备.外壳完整性 | Switchgear and Transformers - Pad-Mounted Equipment - Enclosure Integrity |
| ANSI C 57.12.29-1999 | 开关设备和变压器.安装垫片的设备.近海环境用外壳完整性 | Switchgear and Transformers - Pad-Mounted Equipment - Enclosure Integrity for Coastal Environments |
| ANSI C 57.12.31-1996 | 集成附件.碳钢电极架置型附件 | Enclosure Integrity - Carbon Steel Pole-Mounted Enclosures |
| ANSI C 57.12.40-2000 | 地铁和拱顶类型(浸液).要求 | Subway and Vault Types (Liquid Immersed) - Requirements |
| ANSI C 62.61-1993 | 电话线路的气体管电涌放电器 | Gas Tube Surge Arresters on Wire Line Telephone Circuits |
| ANSI C 63.19-2001 | 无线通信装置和助听器测量的标准方法 | Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids |
| ANSI C 63.2-1996 | 电磁噪音和磁场强度检测仪表,10Hz-40GHz.规范 | Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications |
| ANSI C 78.1372-1997 | 电灯.70瓦特,M98单端金属检卤灯 | Electric Lamps - 70-Watt, M98 Single-Ended Metal Halide Lamps |
| ANSI C 78.1374-1997 | 电灯.50瓦特,M110单端金属检卤灯 | Electric Lamps - 50-Watt, M110 Single-Ended Metal-Halide Lamps |
| ANSI C 78.1375-1997 | 金属检卤灯.400瓦特,M59规范 | Metal Halide Lamps, Specifications for 400-Watt, M59 |
| ANSI C 78.1376-1997 | 金属检卤灯.1000瓦特,M47规范 | Metal-Halide Lamp, 1000-Watt, M47 |
| ANSI C 78.1377-1997 | 电灯.175瓦特,M57单端金属检卤灯规范 | Electric Lamps - 175-Watt, M57 Single-Ended Metal-Halide Lamps - Specifications |
| ANSI C 78.1378-1997 | 250瓦特M58单端金属检卤灯规范 | Specifications for 250-Watt, M58 Single-Ended Metal-Halide Lamps |
| ANSI C 78.1379-1997 | 电灯,1500瓦特M48单端金属检卤灯规范 | Electric Lamps - 1500-Watt, M48 Single-Ended Metal-Halide Lamps - Specifications |
| ANSI C 78.1381-1998 | 电灯.70W、M85 金属卤素灯 | Electric Lamps - 70-Watt, M85 Metal-Halide Lamps |
| ANSI C 78.1382-1997 | 电灯.100瓦特,M90单端金属检卤灯 | Electric Lamps - 100-Watt, M90 Single-Ended Metal-Halide Lamps |
| ANSI C 78.1384-1997 | 电灯.150瓦特,M102单端金属检卤灯 | Electric Lamps - 150-Watt, M102 Single-Ended Metal-Halide Lamps |
| ANSI C 78.1385-1998 | 电灯.150W、M81 双端金属卤素灯 | Electric Lamps - 150-Watt, M81 Double-Ended Metal-Halide Lamps |
| ANSI C 78.1386-1998 | 电灯.100瓦特,M91双端金属检卤灯 | Electric Lamps - 100-Watt, M91 Double-Ended Metal-Halide Lamps |
| ANSI C 78.1387-2001 | 电灯.250瓦、M80双接端金属卤素灯 | Electric Lamps - 250-Watt, M80 Double-Ended Metal Hailde Lamps |
| ANSI C 78.1403-1997 | 电灯.FCS放映灯 | Electric Lamps - FCS Projection Lamp |
| ANSI C 78.1413-2001 | 电灯.两英寸(51mm)集成反应器边缘参照投影灯.中央系统的尺寸 | Electric Lamps - Two-Inch (51-mm) Integral-Reflector-Rim Reference Projection Lamps - Dimensions of Centering Systems |
| ANSI C 78.1417-1997 | 放映灯,有GX5.3或GY5.3的1.65英寸反光灯尺寸和定中心系统 | Projection Lamps, Dimensions and Centering System for 1.65 Inch (42-mm) Integral Reflector Lamps with GX5.3 or GY5.3 Bases |
| ANSI C 78.1420-2001 | 灯的描述.DDS,DDL,EPV,EPX,EPZ,EYG,FHX,DJT,FJX的名称与符号 | Lamp Descriptions: Designations DDS, DDL, EPV, EPX, EPZ, EYG, FHX, DJT, FJX |
| ANSI C 78.1430-1997 | 电灯,幻灯放映灯.带有GX5.3基座的边缘参照卤钨灯的集中的二色的1.65英寸反光器 | Electric Lamps - Slide Projector Lamps - Condensing, Dichroic, 1.65-Inch (42mm), Integral Reflector Rim-Reference Tungsten-Halogen Lamps with GX5.3 Bases |
| ANSI C 78.1431-1997 | 电灯,幻灯放映灯.带有GY5.3基座的边缘参照卤钨灯的集中的二色的2英寸反光器 | Electric Lamps: Slide Projector Lamps: Condensing, Dichroic, 2-Inch (51-mm), Integral Reflector, Rim-Reference Tungsten-Halogen Lamps with GY5.3 Bases |
| ANSI C 78.1432-1997 | 电灯.GZ9.5双插头、定焦距式灯座和36.5mm标定光源中心长度的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5mm Nominal Light Center Length |
| ANSI C 78.1433-2001 | 两英寸(51-mm)集成反应器、边缘参照、带GX 5.3基座的卤钨大屏幕放映灯. | Two-Inch (51-mm) Integral Reflector, Rim Reference, Tungsten Halogen Large Screen Projection Lamps with GX 5.3 Bases |
| ANSI C 78.1434-2001 | 带有GX7.9基座的卤钨投影灯集中二色整体反射边 | Condensing Dichroic Coated Integral Reflector Side Pin Tungsten Halogen Projection Lamps with GX7.9 Bases |
| ANSI C 78.1451-1995 | 电灯.钨卤素灯防护罩使用的注意事项 | Electric Lamps - Use of Protective Shields with Tungsten-Halogen Lamps - Cautionary Notice |
| ANSI C 78.1500-2001 | 电灯.有P28灯座和89mm LCL的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with P28 Bases and 89 mm LCL |
| ANSI C 78.1501-2001 | 电灯.有G22灯座和63.5mm LCL的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with G22 Bases and 63.5 mm LCL |
| ANSI C 78.1503-2001 | 电灯.有G9.5灯座和60.5mm LCL的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with G9.5 Bases and 60.5 mm LCL |
| ANSI C 78.1504-2001 | 电灯.有P28灯座和55.5mm LCL的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with P28 Bases and 55.5 mm LCL |
| ANSI C 78.1505-2001 | 电灯.有G38灯座和127mm LCL的卤钨灯 | Electric Lamps - Tungsten-Halogen Lamps with G38 Bases and 127 mm LCL |
| ANSI C 78.20-1995 | 电灯.带E26中等螺纹的类似形状的交流白炽灯的特性 | Electric Lamps - Characteristics of Incandescent Lamps A, G, PS, and Similar Shapes with E26 Medium Screw Bases |
| ANSI C 78.23-1995 | 电灯.荧光灯.混合类型 | Electric Lamps - Incandescent Lamps - Miscellaneous Types |
| ANSI C 78.24-2001 | 电灯.带前盖的2in(51mm)整体反光灯 | Electric Lamps - Two-Inch (51-mm) Integral Reflector Lamps with Front Covers |
| ANSI C 78.260-1998 | 管形钨卤灯物理特性 | Tubular Tungsten-Halogen Lamps, Physical Characteristics |
| ANSI C 78.30-1997 | 电灯:用于灯绘图准备的过程 | Electric Lamps: Procedure for Use in Preparation of Lamp Space Drawings |
| ANSI C 78.370-1997 | 摄影灯的标识方法 | Designation of Photo Lamps, Method for |
| ANSI C 78.375-1997 | 荧光灯.电气测量指南 | Fluorescent Lamps - Guide for Electrical Measurements |
| ANSI C 78.376-1996 | 荧光灯.色度规范 | Fluorescent Lamps, Specifications for the Chromaticity of |
| ANSI C 78.379-1994 | 电灯.反光灯.束光线的分类 | Electric Lamps - Reflector Lamps - Classification of Beam Patterns |
| ANSI C 78.380-1997 | 高强度放电灯.名称与符号法 | High-Intensity Discharge Lamps - Methods of Designation |
| ANSI C 78.387-1995 | 电灯.金属卤化物灯.测量特性的方法 | Electric Lamps - Metal-Halide-Lamps - Methods of Measuring Characteristics |
| ANSI C 78.387bd-2001 | 电灯.金属检卤灯.特性测量方法 | Electric Lamps - Metal-Halide-Lamps - Methods of Measuring Characteristics |
| ANSI C 78.390-1998 | 电灯命名法.小型和聚光白炽灯 | Method of Designation for Electric Lamps - Miniature and Sealed-Beam Incandescent Lamps |
| ANSI C 78.391-1997 | 电灯.T1和T1-3/4形状小型灯的特性 | Electric Lamps - Characteristics of Miniature Lamps of T1 and T1-3/4 Shapes |
| ANSI C 78.41-2001 | 电灯.低压钠灯指南 | Electric Lamps - Guidelines for Low-Pressure Sodium Lamps |
| ANSI C 78.42-2001 | 电灯.高压钠灯 | Electric Lamps - High-Pressure Sodium Lamps |
| ANSI C 78.5-1997 | 电灯.自镇流荧光灯.性能指南 | Electric Lamps - Fluorescent Self-Ballasted Lamps - Performance Guide |
| ANSI C 78.81-2001 | 荧光灯.双基座.尺寸和电特性 | Fluorescent Lamps - Double Based - Dimensional and Electrical Characteristics |
| ANSI C 78.901-2001 | 电灯.单头荧光灯.尺寸和电气特性 | Electric Lamps - Sigle-Ended Fluorescent Lamps - Dimensional and Electrical Characteristics |
| ANSI C 80.6-1994 | 中间金属导体.锌涂层的(IMC) | Intermediate Metal Conduit - Zinc Coated (IMC) |
| ANSI C 81.61a-1993 | 电灯基座 | Electrical Lamp Bases |
| ANSI C 81.61b-1994 | 电灯灯座 | Electrical Lamp Bases |
| ANSI C 81.61bb-2002 | 电灯基座 | Electrical Lamp Bases |
| ANSI C 81.61c-1995 | 电灯.电灯基座 | Electric Lamps - Electrical Lamp Bases |
| ANSI C 81.61d-1995 | 电灯基座 | Electrical Lamp Bases |
| ANSI C 81.61e-1996 | 电灯基座.G5小型双销基座 | Electrical Lamp Bases - G5 Miniature Bipin Base |
| ANSI C 81.61f-1996 | 电灯基座.E11小型螺纹基座和E17中间螺纹基座 | Electrical Lamp Bases - E11 Mini-Can Screw Base and E17 Intermediate Screw Base |
| ANSI C 81.61g-1996 | 电灯基座.序言,内容表和附录A和B | Electric Lamp Bases: Foreword, Table of Contents and Annexes A and B |
| ANSI C 81.61h-1996 | W2.1x4.9d锲形基座.W2.1x9.2d锲形基座 | W2.1x4.9d Wedge Base; W2.1x9.2d Wedge Base |
| ANSI C 81.61n-1997 | 电灯基座:G16d 大型和扩展的大型端管脚管底座.电灯基座:G16d终端 | Electric Lamps Bases: G16d Mogul and Extended Mogul End-Prong Bases; Electric Lamp Bases: G16d Termination |
| ANSI C 81.61p-1997 | 电灯基座:E10小型螺口基座 | Electrical Lamp Bases: E10 Miniature Screw Base |
| ANSI C 81.61r-1998 | 电灯.电灯基座.内槽双接线基座 | Electric Lamps - Electrical Lamp Bases - Recessed Double-Contact Base |
| ANSI C 81.61s-1998 | 电灯基座:2G13 U-型荧光灯基座用*1-420-2型标准板材 | Electric Lamp Bases: Standard Sheets *1-420-2, for 2G13 U-Shaped Fluorescent Base |
| ANSI C 81.61v-2000 | 电灯基座.BY22d 基座 | Electric Lamps - Electrical Lamp Bases - BY22d Bases |
| ANSI C 81.61x-2001 | 电灯基座.GZ4和 P32d/PK32d 基座 | Electrical Lamp Bases - GZ4 and P32d/PK32d Bases |
| ANSI C 81.62bb-2002 | 电灯灯座 | Lampholders for Electric Lamps |
| ANSI C 81.62c-1995 | 电灯.电灯灯座 | Electric Lamps - Electrical Lampholders |
| ANSI C 81.62d-1995 | 电灯头 | Electrical Lampholders |
| ANSI C 81.62e-1996 | 电灯灯座.G5小型双插头灯座和2G13 U型莹光灯灯座 | Electrical Lamp Bases - G5 Miniature Bipin Lampholders and 2G13 U-Shaped Fluorescent Lampholders |
| ANSI C 81.62f-1996 | 电灯灯座.E11小型螺纹灯座和E17中间螺纹灯座 | Electrical Lamp Bases - E11 Mini-Can Screw Lampholder and E17 Intermediate Screw Lampholder |
| ANSI C 81.62g-1996 | 电灯头.序言,内容表和附录A,B | Lampholders for Electric Lamps: Foreword, Table of Contents and Annexes A and B |
| ANSI C 81.62r-1998 | 电灯.电灯头用灯座.内槽双接线基座 | Electric Lamps - Lampholders for Electric Lamps Caps - Recessed Double-Contact Lampholder |
| ANSI C 81.62v-2000 | 电灯.电灯用灯座.BY22d 灯座 | Electric Lamps - Lampholders for Electrical Lamps - BY22d Lampholders |
| ANSI C 81.62x-2001 | 电灯用灯座.GZ4和P32/PK32 灯座 | Lampholders for Electrical Lamps - GZ4 and P32/PK32 Lampholders |
| ANSI C 81.63bb-2002 | 电灯基座和灯座用量规 | Gauges for Electric Lamp Bases and Lampholders |
| ANSI C 81.63c-1995 | 电灯.电灯底座和灯头 | Electric Lamps - Electrical Lamp Bases and Lampholders |
| ANSI C 81.63d-1995 | 电灯底座和灯头量规 | Gauges for Electric Lamp Bases and Electrical Lampholders |
| ANSI C 81.63e-1996 | 电灯底座:2G13基座G5小型双销基座和灯头的扭矩试验装置 | Electrical Lamp Bases: Torsion Test Devices for G5 Miniature Bipin Bases and Lampholders Go Guages for 2G13 Bases |
| ANSI C 81.63f-1996 | 电灯灯座 | Electrical Lamp Bases |
| ANSI C 81.63g-1996 | 电灯基座和灯头量规:前言.内容表格和附录A和B | Gauges for Electric Lamp Bases and Lampholders: Foreword, Table of Contents and Annexes A and B |
| ANSI C 81.63h-1996 | W2.1x4.9d最小和最大保持量规,W2.1x9.2d最小和最大保持量规 | W2.1x4.9d Minimum and Maximum Retention Gauge, W2.1x9.2d Minimum and Maximum Retention Gauge |
| ANSI C 81.63p-1997 | 电灯基座和灯头量规.E10小型螺纹灯和非固定基座的不过端环量规 | Gauges for Electric Lamp Bases and Lampholders: Not-Go Ring Gauge for E10 Miniature Screw-Based Lamps and Unmounted Bases |
| ANSI C 81.63v-2000 | 电灯.电灯和灯座用量规.BY22d 量规 | Electric Lamps - Gauges for Electrical Lamps and Lampholders - BY22d Gauges |
| ANSI C 81.63x-2001 | 电灯基座和灯座用量规.GZ4量规 | Gauges for Electric Lamp Bases and Lampholders - GZ4 Gauges |
| ANSI C 82.1-1997 | 荧光灯镇流器规范 | Specifications for Fluorescent Lamp Ballasts |
| ANSI C 82.11c-2001 | 标准性附录A:可控镇流器的低压控制接口规范.信息性附录B:可控镇流器的命名规范 | Normative Annex A: Specification for Low Voltage Control Interface for Controllable Ballasts and Informative Annex B: Specification for Nomenclature for Controllabe Ballasts |
| ANSI C 82.12-1999 | 电灯镇流器.镇流匹配器 | Lamp Ballasts - Ballasted Adaptors |
| ANSI C 82.77-2001 | 灯的镇流器.谐波发射限值.照明设备的有关电源的质量要求 | Lamp Ballasts-Harmonic Emission Limits-Related Power Quality Requirements for Lighting Equipment |
| ANSI C 82.9-1996 | 高强度放电和低压钠灯.镇流器和变压器.定义 | High-Intensity-Discharge and Low-Pressure Sodium Lamps, Ballasts and Transformers - Definitions |
| ANSI C 93.1-1999 | 输电线载波耦合电容器和耦合电容器电压变压器(CCVT).要求 | Power Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT) - Requirements |
| ANSI C 93.5-1997 | 单一功能动力线传输发射/接收要求 | Requirements for Single Function Power-Line Carrier Transmitter/Receiver Equipment |
| ANSI C119.1-1986 | 电连接器.额定电压为600伏的密封绝缘式地下连接器系统 | Electric Connectors - Sealed Insulated Underground Connector Systems Rated 600 Volts |
| ANSI C119.1-2002 | 额定600伏的密封绝缘地下连接器系统 | (Sealed Insulated Underground Connector System Rated 600 Volts ) |
| ANSI C119.4-1991 | 电连接器.架空导线使用的裸铝-铝或铝-铜连接器 | Electric Connectors - Connectors for Use Between Aluminum-to-Aluminum or Aluminum- to-Copper Bare Overhead Conductors |
| ANSI C119.4-2003 | 电连接器.铝铝间或铝铜间架空裸线连接接器 | (Electric Connectors - Connectors for Use between Aluminum-to-Aluminum or Aluminum-to-Copper Bare Overhead Connectors ) |
| ANSI C12.10-2004 | 机电式瓦特表 | |
| ANSI C12.11-1987 | 收费测量值为10千伏-350千伏BIL(0.6千伏-69千伏的NSV)仪用互感器 | Instrument transformers for revenue metering, 10 kV BIL through 350 kV (0.6 kV NSV through 69 kV NSV) |
| ANSI C12.13-1991 | 电度表的工作计时器 | Electronic time-of-use registers for electricity meters |