 |
| 编号 | 中文名称 | 英文名称 |
| ANSI C78.1423-1991 | 电灯.ENH投影灯 | Electric Lamps - ENH Projection Lamp |
| ANSI C78.1424-1991 | 电灯.EXR投影灯 | Electric Lamps - EXR Projection Lamp |
| ANSI C78.1425-1991 | 电灯.EXW投影灯 | Electric Lamps - EXW Projection Lamp |
| ANSI C78.1426-1991 | 电灯.EXY投影灯 | Electric Lamps - EXY Projection Lamp |
| ANSI C78.1435-2002 | 投影灯.具有65.3基座的钨-卤素灯 | (Projection Lamps - Tungsten-Halogen Lamps with G5.3 Bases ) |
| ANSI C78.1450-1983 | 电灯.白炽投影灯.寿命的试验方法 | Electric Lamps - Incandescent Projection Lamps - Method for Life Testing |
| ANSI C78.1451-2002 | 电灯.钨卤素灯防护罩使用的注意事项 | (Electric Lamps - Use of Protective Shields with Tungsten-Halogen Lamps - Cautionary Notice ) |
| ANSI C78.1452-1991 | 电灯.投影灯.词汇 | Electric Lamps - Projection Lamps - Vocabulary |
| ANSI C78.1452-2004 | 电灯.投影灯.词汇 | |
| ANSI C78.1460-1991 | 电灯.GZ9.5基座,T6灯泡,36.5毫米LCL,76.2毫米MOL,有近反射器的单端钨卤素灯 | Electric Lamps - Single-Ended Tungsten-Halogen Lamps GZ9.5 Base, T6 Bulb, 36.5 mm LCL, 76.2 mm MOL with Proximity Reflector |
| ANSI C78.1460-2004 | GZ9.5基座,T6灯泡,36.5毫米LCL,76.2毫米MOL,有近反射器的单端钨卤素灯 | |
| ANSI C78.1502-1993 | 电灯.G22基座的101.6mmLCL的卤钨灯 | Electric lamps - Tungsten-halogen lamps with G22 bases and 101.6 mm LCL |
| ANSI C78.180-1972 | 荧光灯起辉器规范.校正1972.5 | Specifications for Fluorescent Lamp Starters; Correction - May 1972 |
| ANSI C78.180-2003 | 荧光灯起辉器规范 | (Fluorescent Lamp Starters, Specifications for ) |
| ANSI C78.2-1991 | 采用内部启动的10W,13W,18W,26W单端四芯管预热启动型荧光灯(ANSI C78.2-1991的补充件) | 10W, 13W, 18W and 26W Single-Ended Quad Tube Preheat-Start Fluorescent Lamps with Internal Means of Starting; Supplement C78.2A - 1991 |
| ANSI C78.20-2003 | 电灯.带E26中型螺纹灯座的A、G、PS和类似形状的白炽灯特性 | (Electric Lamps - Characteristics of Incandescent Lamps A, G, PS, and Similar Shapes with E26 Medium Screw Bases ) |
| ANSI C78.21-1995 | 白炽灯.PAR和R型 | Incandescent lamps - PAR and R shapes |
| ANSI C78.22-1995 | 带E39大型螺旋灯头的A,G,PS型及相似类型 | Incandescent lamps - A, G, PS and similar shapes with E39 mogul screw bases |
| ANSI C78.25-1991 | 电灯.灯头温升.测量方法 | Electric Lamps - Lamp-Base Temperature Rise - Method of Measurement |
| ANSI C78.260-1990 | 电灯.钨卤素管灯.物理性能 | Electric Lamps - Tubular Tungsten-Halogen Lamps - Physical Characteristics |
| ANSI C78.260-2002 | 管形钨卤灯的物理特性 | (Tubular Tungsten-Halogen Lamps, Physical Characteristics ) |
| ANSI C78.261-1977 | 红外线白炽管灯 | Tubular Incandescent Infrared Lamps |
| ANSI C78.3-1991 | 荧光灯.瞬时启动型和冷阴型.尺寸和电气特性 | Fluorescent Lamps - Instant-Start and Cold-Cathode Types - Dimensional and Electrical Characteristics |
| ANSI C78.370/390 lcd-2002 | 标识方法 | (Method of Designation ) |
| ANSI C78.380-2002 | 高强度放电灯.名称与符号法 | (High-Intensity Discharge Lamps - Methods of Designation ) |
| ANSI C78.380a-2004 | 高强度放电灯.标识方法 | |
| ANSI C78.381-1961 | 辉光灯标识法 | Method for Designation of Glow Lamps |
| ANSI C78.385-1961 | 辉光灯测量 | Measurement of Glow Lamps |
| ANSI C78.386-1989 | 电灯.汞灯.测定特性的方法 | Electric Lamps - Mercury Lamps - Methods of Measuring Characteristics |
| ANSI C78.387c-2002 | 电灯.电灯重燃电压的测量方法 | (Electric Lamps - Method of Measurment of Lamp Reignition Voltage ) |
| ANSI C78.388-1990 | 电灯.高压钠灯.测定特性的方法 | Electric Lamps - High-Pressure Sodium Lamps - Methods of Measuring Characteristics |
| ANSI C78.389-2004 | 高强度放电灯.测量特性的方法 | |
| ANSI C78.391-2004 | 电灯.T1和T1-3/4型小型灯的特性 | |
| ANSI C78.40-1992 | 水银灯的技术要求 | Specification for mercury lamps |
| ANSI C78.42-2004 | 电灯.高压钠灯 | |
| ANSI C78.43-2004 | 电灯.单端(SE)金属卤化物灯 | |
| ANSI C78.5-2003 | 电灯.荧光自镇流灯.性能指南 | (Electric Lamps - Fluorescent Self-Ballasted Lamps - Performance Guide ) |
| ANSI C78.60360-2002 | 电灯.灯头温度升高的标准测量方法 | (Electric Lamps- Standard Method of Measurement of Lamp Cap Temperature Rise ) |
| ANSI C78.60432.2-2004 | 电灯.白炽灯.安全规范.家用和类似一般照明用钨卤灯.第2部分 | |
| ANSI C78.60432.3-2004 | 电灯.白炽灯.安全规范.第3部分:钨卤灯 | |
| ANSI C78.81-2003 | 荧光灯.双座.尺寸和电特性 | (Fluorescent Lamps - Double Based - Dimensional and Electrical Characteristics ) |
| ANSI C78.LL 1256-2003 | 电灯.荧光灯样品制备和毒性浸出过程 | (Electric Lamps-Procedures for Fluorescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure ) |
| ANSI C78.LL 3-2003 | 电灯.高强度放电灯样品制备和毒性浸出过程 | (Electric Lamps-Procedures for High Intensity Discharge Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure ) |
| ANSI C78.LL 4-2003 | 电灯.白炽灯样品制备和毒性浸出过程 | (Electric Lamps-Procedures for Incandescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure ) |
| ANSI C79.1-1994 | 玻璃灯泡的名词术语.指定用于电灯 | Nomenclature for glass bulbs - intended for use with electric lamps |
| ANSI C79.1-2002 | 电灯玻璃灯泡的专有名词 | (Nomenclature for Glass Bulbs - Intended for Use with Electric Lamps ) |
| ANSI C80.1-2005 | 镀锌刚性钢导管(GCR) | |
| ANSI C80.3-2005 | 钢制电气金属管(EMT) | |
| ANSI C80.5-2005 | 电气钢性铝导管(ERAC) | |
| ANSI C81.61-1990 | 电灯灯头 | Electric Lamp Bases |
| ANSI C81.61bb-2002 | 电灯基座 | (Electrical Lamp Bases ) |
| ANSI C81.62-1991 | 电灯灯座 | Lampholders for Electric Lamps |
| ANSI C81.62a Supplement-1993 | 电灯灯座.补充件 | Lampholders for electric lamps; Supplement |
| ANSI C81.62a-1993 | 电灯用灯座.补充件 | Lampholders for electric lamps; Supplement |
| ANSI C81.62bb-2002 | 电灯灯座 | (Lampholders for Electric Lamps ) |
| ANSI C81.63-1991 | 灯头和灯座用量规 | Gauges for Electric Lamp Bases and Lampholders |
| ANSI C81.63a Supplement-1993 | 灯头和灯座用量规.补充件 | Gauges for electric lamp bases and lampholders; Supplement |
| ANSI C81.63a-1993 | 电灯基座和灯座用量规.补充件 | Gauges for electric lamp bases and lampholders; Supplement |
| ANSI C81.63bb-2002 | 电灯基座和灯座用量规 | (Gauges for Electric Lamp Bases and Lampholders ) |
| ANSI C81.64-1993 | 电灯灯头、灯座和规格用一般信息和指南 | Guidelines and general information for electrical lamp bases, lampholders and gauges |
| ANSI C81.64-2005 | 电灯灯头、灯座和量规的一般信息和指南 | |
| ANSI C82.11 consolidated-2004 | 灯镇流器.高频荧光灯镇流器.补充件 | |
| ANSI C82.11-1993 | 高频荧光灯镇流器 | High-frequncy fluorescent lamp ballasts |
| ANSI C82.13-2002 | 荧光灯和镇流器.定义 | (Fluorescent Lamps and Ballasts - Definitions ) |
| ANSI C82.2-1984 | 荧光灯用镇流器.测量方法 | Fluorescent Lamp Ballasts - Methods of Measurement |
| ANSI C82.2-2002 | 荧光灯镇流器的测量方法 | (Fluorescent Lamp Ballasts, Methods of Measurement of ) |
| ANSI C82.3-1983 | 荧光灯用标准镇流器 | Reference Ballasts for Fluorescent Lamps |
| ANSI C82.3-2002 | 荧光灯镇流器的规范 | (Fluorescent Lamp Reference Ballasts, Specifications for ) |
| ANSI C82.4-1992 | 高亮度放电灯和低压钠灯的镇流器(多源供电) | Ballasts - For high-intensity-discharge and low-pressure sodium lamps (multiple-supply type) |
| ANSI C82.4-2002 | 镇流器.高强度放电和低压钠灯(多源式) | (Ballasts - for High-Intensity-Discharge and Low-Pressure Sodium Lamps (Multiple-Supply Type) ) |
| ANSI C82.5-1990 | 标准镇流器.高亮度放电和低压钠灯 | Reference Ballasts - High-Intensity-Discharge and Low-Pressure Sodium Lamps |
| ANSI C82.6-1985 | 高亮度放电灯用标准镇流器.测量方法.补充件(ANSI C82.6a-88) | Reference Ballasts for High-Intensity-Discharge Lamps - Methods of Measurement; Supplement C82.6A - 1988 |
| ANSI C82.6-2005 | 高亮度放电灯用标准镇流器.测量方法 | |
| ANSI C82.7-1983 | 水银灯变压器.恒定电流(系列)供电型 | Mercury Lamp Transformers - Constant-Current (Series) Supply Type |
| ANSI C82.8-1988 | 灯变压器.白炽灯变压器.恒定电流(系列)供电型 | Lamp Transformers - Incandescent Filament Lamp Transformers - Constant-Current (Series) Supply Type |
| ANSI C84.1-1995 | 电力系统和设备.电压额定值60赫兹 | Electric power systems and equipment - Voltage ratings (60 Hertz) |
| ANSI CC1-2005 | 变电站的电力连接 | |
| ANSI CGATS.10-1995 | 图形技术.印刷平板打眼 | Graphic Technology - Perforations for Printing Plates |
| ANSI CGATS.11-1997 | 制图技术.反射和传输计量学用的经验证的参考材料.文件要求和推荐过程 | Graphic Technology - Certified Reference Materials for Reflection and Transmission Metrology - Documentation Requirements and Recommended Procedures |
| ANSI CGATS.20-2002 | 图形技术.用PPML和PDF的可变打印数据交换(PPML/VDX) | (Graphic technology - Variable printing data exchange using PPML and PDF (PPML/VDX) ) |
| ANSI CGATS.4-1993 | 图形技术.图形工艺影象光密度测定.术语、公式、图象素和过程 | Graphic Technology - Graphic Arts Reflection Densitometry Measurements - Terminology, Equations, Image Elements, and Procedures |
| ANSI CGATS.5-1993 | 图形技术.图形工艺的光谱测定和比色计算 | Graphic Technology - Spectral Measurement and Colorimetric Computation for the Graphic Arts |
| ANSI CGATS.5-2003 | 图形技术.图形工艺的光谱测量和比色计算 | (Graphic Technology - Spectral Measurement and Colorimetric Computation for the Graphic Arts ) |
| ANSI CGATS.6-1995 | 图形技术.图形工艺印刷规范.类型1 | Graphic Technology --Specifications for Graphic Arts Printing - Type 1 |
| ANSI CGATS.7-1995 | 图形技术.印刷材料的装载板 | Graphic Technology - Pallet Loading for Printed Materials |
| ANSI CGATS.7-2003 | 图形技术.印刷材料的载料板 | (Graphic Technology - Pallet Loading for Printed Materials ) |
| ANSI CGATS.9-1994 | 图形技术.图形工艺传输光密度测定.术语、公式、图象素和过程 | Graphic Technology - Graphic Arts Transmission Densitometry Measurements - Terminology, Equations, Image Elements, and Procedures |
| ANSI CGATS.9-2005 | 图形技术.图形工艺传输光密度测定.术语、公式、图象素和方法 | |
| ANSI CGATS.TR 001-1995 | 图解表示的工艺.1型印刷的彩色特性数据(非美国国家标准) | Graphic Technology - Color Characterization Data for Type 1 Printing (NOT AN AMERICAN NATIONAL STANDARD) |
| ANSI CGATS/ISO15930-6-2004 | 图形技术.用PDF格式进行预印数字数据交换.第6部分:用PDF 1.4 (PDF/X-3)格式进行适用于颜色管理工作流的印刷数据的完整交换 | |
| ANSI D20-2002 | 交通记录系统的数据字典 | (Data Element Dictionary for Traffic Records Systems ) |
| ANSI D20.1-1993 | 交通记录系统用数据词典 | Data element dictionary for traffic records systems |
| ANSI E 1.14-2001 | 娱乐技术.喷雾手册包含的推荐规程 | Entertainment Technology - Recommendations for Inclusions in Fog Equipment Manuals |
| ANSI E 1.2-2000 | 娱乐技术.设计,制造和使用铝桁架和塔 | Entertainment Technology - Design, Manufacture and Use of Aluminum Trusses and Towers |
| ANSI E 1.3-2001 | 娱乐技术.灯光控制系统.0-10V模拟控制规范 | Entertainment Technology - Lighting Control Systems - 0 to 10V Analog Control Specification |
| ANSI E1.16-2002 | 娱乐技术.金属卤化物稳定电缆配置标准 | (Entertainment Technology - Configuration Standard for Metal-Halide Ballast Power Cables ) |
| ANSI E1.5-2003 | 娱乐业技术.二和三醇水溶液制成的舞台背景用雾 | (Entertainment Technology - Theatrical Fog Made with Aqueous Solutions of Di- and Trihydric Alcohols ) |
| ANSI FM 4880-2001 | 1级着火试验标准:A)隔绝墙或墙屋顶和房顶.B)塑料内衬材料.C)塑料外建筑板.D)墙壁和天花板涂层系统.E)内外装修系统 | Fire Test Standard for Class 1: A) Insulated Wall or Walls and Ceilings or Roofs; B) Plastic Interior Finish Materials; C) Plastic Exterior Building Panels; D) Wall and Wall and Ceiling Coating Systems; E) Interior or Exterior Finish Systems |
| ANSI FM4474-2004 | 用静态正和/或负差压评价屋顶组件耐模拟风吹起的试验标准 | |
| ANSI FPCS-1-1994 | 液压传动和运动控制.液压传动机械师、技术员、专家和工程师的认证 | Fluid Power and Motion Control - Certification of Fluid Power Mechanics, Technicians, Specialists, and Engineers |
| ANSI GPTC Z 380.1 1998 Addendum 3-2000 | 燃气传输和分配管道系统1998-2000指南 | Guide for Gas Transmission and Distribution Piping Systems 1998-2000 |
| ANSI H 35.2M-2001 | 铝矿产品的尺寸公差(米制) | Dimensional Tolerances for Aluminum Mill Products (Metric) |
| ANSI H35.1-2003 | 铝用合金和调合物名称与符号体系 | (Alloy and Temper Designation Systems for Aluminum ) |
| ANSI H35.1-2004 | 铝合金及回火命名体系 | |
| ANSI H35.1M-2003 | 铝用合金和调合物名称与符号体系(公制) | (Alloy and Temper Designation Systems for Aluminum (Metric) ) |
| ANSI H35.1M-2004 | 铝合金(米制)及回火命名体系 | |
| ANSI H35.2-2003 | 铝轧制品的尺寸公差 | (Dimensional Tolerances for Aluminum Mill Products ) |
| ANSI H35.2M-2003 | 铝轧制品的尺寸公差(米制) | (Dimensional Tolerances for Aluminum Mill Products (Metric) ) |
| ANSI H35.3-1997 | 铝硬化剂的命名体系 | Designation system for aluminium hardeners |
| ANSI H35.4-2003 | 非合金铝的名称与符号体系 | (Designation System for Unalloyed Aluminum ) |
| ANSI H35.5-1993 | 铝金属基体复合材料的命名体系 | Nomenclature system for aluminium metal matrix composite materials |
| ANSI ICST 1-1986 | 信息系统.指印识别.信息交换的数据格式 | Information Systems - Fingerprint Identification - Data Format for Information Interchange |
| ANSI INCITS 358-2002 | 信息技术.BioAPI 规范 (版本1.1) | Information technology - BioAPI Specification (Version 1.1) |
| ANSI INCITS172-2002 | 信息技术.信息技术的美国国家标准词汇 | (Information Technology - American National Standard Dictionary of Information Technology (ANSDIT) ) |
| ANSI INCITS330 AMD 1-2003 | 信息技术.精简块命令集(RBC).修改件1 | (Information Technology - Reduced Block Command Set (RBC) - Amendment 1 ) |
| ANSI INCITS332 AMD 1-2003 | 信息技术.光纤通道.仲裁回路(FC-AL-2).修改件1 | (Information technology - Fibre Channel Arbitrated Loop (FC-AL-2) Amendment 1 ) |
| ANSI INCITS338-2003 | 信息技术.高效平行接口.6400 Mbit/s光学规范(HIPPI-6400-OPT) | (Information Technology - High-Performance Parallel Interface - 6400 Mbit/s Optical Specification (HIPPI-6400-OPT) ) |
| ANSI INCITS350-2003 | 信息技术.SCSI第2版(FCP-2)用光纤通道协议 | (Information Technology - Fibre Channel Protocol for SCSI, Second Version (FCP-2) ) |
| ANSI INCITS352-2002 | 信息技术.光纤通道.物理接口 | (Information technology - Fibre Channel - Physical Interfaces (FC-PI) ) |
| ANSI INCITS353-2004 | 地理信息系统.设施、基础结构和环境用空间数据标准(SDSFIE) |
Copyright © 2008 Worldwide Translation.
宽天下翻译公司版权所有.Tel:010-83345348
