海量最新、最全国外技术标准原文、中文版速递——>点击
首页 > 英国标准 > 正文

BSI BS 标准数据库目录2014-11-12

发布-leeglee | 查看- | 发表时间-2015/1/19
说明:网站上所展示的为部分标准中文翻译目录,如果您未能查到您所需要的标准请联系我们(来信询问,均会及时回复)

 

BSI BS AU 257 N/A Code of Practice for Remanufacture of Spark and Compression Ignition Engines 10pages
 
BSI BS EN 16479 N/A Draft BS EN 16479 Water quality - Performance requirements and conformity test procedures for water monitoring equipment Part 1: Automated sampling devices (samplers) for water and waste water  36pages
 
BSI PD IEC/TS 62647-3 N/A Process management for avionics - Aerospace and defence electronic systems containing lead-free solder Part 3: Performance testing for systems containing lead-free solder and finishes  46pages
 
BSI BS ISO 21101 N/A Draft BS ISO 21101 Adventure tourism - Safety Management System - Requirements  32pages
 
BSI BIP 0072 N/A Are you ready for a BS ISO/IEC 27001 information security management systems (ISMS) audit? - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide 0pages
 
BSI BS AU 268 N/A Passenger cars and light vans - Commercial towing pole assemblies - Specification 12pages
 
BSI BS A 273 N/A Specification for Gauging Practice for 100 Degree Countersunk Head Fasteners for Flushness Control 8pages
 
BSI BS ISO 16900-4 N/A Respiratory protective devices — Methods of test and test equipment Part 4: Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing 26pages
 
BSI BS A 272 N/A Specification for Hi-Torque Speed Drive Recess: Dimensions and Gauging for Countersunk Head Fasteners 4pages
 
BSI BS A 266-BS A 271 N/A Specification for 100 Degree Countersunk Head Titanium Alloy Bolts 160 000 Lbf/Square Inches (1100 MPa) with Hi-Torque Speed Drive Recesses - AMD 2811: April 30, 1979 13pages
 
BSI BS EN 12811-4 N/A Draft BS EN 12811-4 Temporary works equipment Part 4: Protection fans for scaffolds Performance requirements and product design  26pages
 
BSI BS ISO 55001 N/A Asset management - Management systems – Requirements  26pages
 
BSI BS ISO 17162 N/A Draft BS ISO 17162 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of monolithic ceramics at room temperature - Determination of compressive strength  18pages
 
BSI BS A 254-BS A 259 N/A Hexagonal Head Titanium Alloy Bolts 160 000 lbf/in2 (1100 MPa) - AMD 2647: July 1978; AMD 2812: April 1979 14pages
 
BSI BS EN 61784-5-3 N/A Industrial communication networks - Profiles Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3  112pages
 
BSI BS ISO 21308-5 N/A Draft BS ISO 21308-5 Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) Part 5: Coding of loader crane bodywork  62pages
 
BSI BS IEC 62715-6-1 N/A Draft BS EN 62715-6-1 Flexible display devices Part 6-1: Mechanical stress test methods  16pages
 
BSI BS ISO 10649-2 N/A Cutter arbors with parallel key and tenon drive Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface  16pages
 
BSI PD IEC/TS 62257-1 N/A Draft BS EN TS 62257-1 Recommendations for small renewable energy and hybrid systems for rural electrification - Part 1: General introduction to rural electrification  40pages
 
BSI BS 102000 N/A Draft BS 102000 Code of practice for the provision of investigative services 22pages
 
BSI PD CEN/TR 16563 2103.09.30 Principles of the equivalent durability procedure 42pages
 
BSI BS ISO 17197 2014.12.31 Dimethyl ether (DME) for fuels — Determination of water content — Karl Fischer titration method  22pages
 
BSI BS ISO 22315 2014.12.31 Societal security - Mass evacuation - Guidelines for planning  36pages
 
BSI BS ISO 17907 2014.12.31 Ships and marine technology — Single point mooring arrangements for conventional tankers  22pages
 
BSI BS ISO 18943 2014.12.31 Imaging materials — Magnetic hard drives used for image storage — Care and handling  26pages
 
BSI BS ISO 17198 2014.12.31 Dimethyl ether (DME) for fuels — Determination of total sulfur, ultraviolet fluorescence method  24pages
 
BSI BS ISO 24338 2014.12.31 Laminate floor coverings — Determination of abrasion resistance  28pages
 
BSI BS ISO 24631-5 2014.12.31 Radio frequency identification of animals Part 5: Procedure for testing the capability of RFID transceivers of reading ISO 11784 and ISO 11785 transponders  22pages
 
BSI BS ISO/IEC 7811-8 2014.12.31 Identification cards - Recording technique Part 8: Magnetic stripe - Coercivity of 51,7 kA/m (650 Oe)  22pages
 
BSI BS ISO/IEC 23002-4 2014.12.31 Information technology — MPEG video technologies Part 4: Video tool library  120pages
 
BSI BS ISO/IEC 24775-6 2014.12.31 Information technology — Storage management Part 6: Fabric  316pages
 
BSI BS ISO 12651-2 2014.12.31 Electronic document management — Vocabulary Part 2: Workflow management  18pages
 
BSI BS ISO/IEC 19763-10 2014.12.31 Information technology - Metamodel framework for interoperability (MFI) Part 10: Core model and basic mapping  44pages
 
BSI BS ISO 17196 2014.12.31 Dimethyl ether (DME) for fuels — Determination of impurities — Gas chromatographic method  36pages
 
BSI BS ISO 16840-10 2014.12.31 Wheelchairs - Resistance to ignition of non-integrated seat and back support cushions Part 10: Requirements and test methods  24pages
 
BSI BS ISO 16760 2014.12.31 Graphic technology — Prepress data exchange — Preparation and visualization of RGB images to be used in RGBbased graphics arts workflows  50pages
 
BSI BS ISO 15845 2014.12.31 Aircraft ground equipment - Boarding vehicle for persons with reduced mobility - Functional and safety requirements  32pages
 
BSI BS ISO 15341 2014.12.31 Graphic technology — Method for radius determination of printing cylinders  28pages
 
BSI BS ISO 15096 2014.12.31 Jewellery — Determination of silver in 999 0/00 silver jewellery alloys — Difference method using ICP-OES  18pages
 
BSI BS ISO 14595 2014.12.31 Microbeam analysis - Electron probe microanalysis - Guidelines for the specification of certified reference materials (CRMs)  26pages
 
BSI BS ISO 13611 2014.12.31 Interpreting - Guidelines for community interpreting  26pages
 
BSI BS ISO/IEC 24775-7 2014.12.31 Information technology — Storage management Part 7: Host elements  156pages
 
BSI BS ISO 13105-1 2014.12.31 Building construction machinery and equipment — Machinery for concrete surface floating and finishing Part 1: Terms and commercial specifications  18pages
 
BSI PD CEN/TR 16748 2014.12.31 Aluminium and aluminium alloys — Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting  26pages
 
BSI BS ISO 12164-4 2014.12.31 Hollow taper interface with flange contact surface Part 4: Dimensions of receivers for stationary tools  16pages
 
BSI BS ISO 12164-3 2014.12.31 Hollow taper interface with flange contact surface Part 3: Dimensions of shanks for stationary tools  20pages
 
BSI BS ISO 13105-2 2014.12.31 Building construction machinery and equipment — Machinery for concrete surface floating and finishing Part 2: Safety requirements and verification  26pages
 
BSI PD IEC/TR 61916 2014.12.31 Electrical accessories - Harmonization of general rules  34pages
 
BSI PD ISO/TS 17822-1 2014.12.31 In vitro diagnostic test systems — Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens Part 1: General requirements, terms and definitions  34pages
 
BSI PD ISO/TS 17536-3 2014.12.31 Road vehicles — Aerosol separator performance test for internal combustion engines Part 3: Method to perform engine gravimetric test  16pages
 
BSI PD ISO/TS 17182 2014.12.31 Soil quality — Determination of some selected phenols and chlorophenols — Gas chromatographic method with mass spectrometric detection  24pages
 
BSI PD ISO/TR 19686-1 2014.12.31 Petroleum products — Equivalency of test method determining the same property Part 1: Atmospheric distillation of petroleum products  18pages
 
BSI PD ISO/TR 17243-1 2014.12.31 Machine tool spindles — Evaluation of machine tool spindle vibrations by measurements on spindle housing Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1  30pages
 
BSI PD ISO/TR 16310 2014.12.31 Symbol libraries for construction and facilities management  26pages
 
BSI PD ISO/PAS 19697 2014.12.31 Ships and marine technology — Navigation and ship operations — Electronic inclinometers  30pages
 
BSI PD ISO/IEC TS 17021-6 2014.12.31 Conformity assessment — Requirements for bodies providing audit and certification of management systems Part 6: Competence requirements for auditing and certification of business continuity management systems  18pages
 
BSI PD ISO/IEC TR 29181-5 2014.12.31 Information technology — Future Network — Problem statement and requirements Part 5: Security  16pages
 
BSI PD ISO/IEC TR 29181-2 2014.12.31 Information technology — Future Network — Problem statement and requirements Part 2: Naming and addressing  46pages
 
BSI PD ISO/IEC GUIDE 71 2014.12.31 Guide for addressing accessibility in standards  58pages
 
BSI PD IEC/TS 62607-5-1 2014.12.31 Nanomanufacturing — Key control characteristics Part 5-1: Thin-film organic/nano electronic devices — Carrier transport measurements  20pages
 
BSI PD CEN/TR 15339-4 2014.12.31 Thermal spraying — Safety requirements for thermal spraying equipment Part 4: Gas and liquid fuel supply  20pages
 
BSI PD IEC/TR 62939-1 2014.12.31 Smart grid user interface Part 1: Interface overview and country perspectives  132pages
 
BSI BS ISO/IEC 90003 2014.12.31 Software engineering — Guidelines for the application of ISO 9001:2008 to computer software  66pages
 
BSI PD IEC/PAS 62396-6 2014.12.31 Process management for avionics — Atmospheric radiation effects Part 6: Extreme space weather and potential impact on the avionics environment and electronics  76pages
 
BSI PD CEN/TS 15448 2014.12.31 Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems)  242pages
 
BSI PD CEN/TS 13649 2014.12.31 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption  52pages
 
BSI PD CEN/TR 16787 2014.12.31 Industrial Gas Installation — Guideline  62pages
 
BSI BS ISO 8820-1 2014.12.31 Road vehicles - Fuse-links Part 1: Definitions and general test requirements  20pages
 
BSI PD CEN/TR 15339-5 2014.12.31 Thermal spraying — Safety requirements for thermal spraying equipment Part 5: Powder and wire feed units  12pages
 
BSI BS ISO 11136 2014.12.31 Sensory analysis — Methodology — General guidance for conducting hedonic tests with consumers in a controlled area  56pages
 
BSI PD CEN/TR 15339-3 2014.12.31 Thermal spraying — Safety requirements for thermal spraying equipment Part 3: Torches for thermal spraying and their connection and supply units  14pages
 
BSI PD CEN/TR 15339-1 2014.12.31 Thermal spraying — Safety requirements for thermal spraying equipment Part 1: General requirements  16pages
 
BSI PD CEN/TR 13201-1 2014.12.31 Road lighting Part 1: Guidelines on selection of lighting classes  30pages
 
BSI PD CEN/TR 12872 2014.12.31 Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs  28pages
 
BSI PD CEN/TR 10317 2014.12.31 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)  16pages
 
BSI PD 5304 2014.12.31 Guidance on safe use of machinery - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide  0pages
 
BSI PD IEC/TS 60871-2 2014.12.31 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V Part 2: Endurance testing  14pages
 
BSI BS EN 15811 2014.12.31 Agricultural machinery — Fixed guards and interlocked guards with or without guard locking for moving transmission parts  14pages
 
BSI BS EN 13138-2 2014.12.31 Buoyant aids for swimming instruction Part 2: Safety requirements and test methods for buoyant aids to be held  24pages
 
BSI BS EN 13138-3 2014.12.31 Buoyant aids for swimming instruction Part 3: Safety requirements and test methods for swim seats to be worn  52pages
 
BSI BS EN 14140 2014.12.31 LPG equipment and accessories — Transportable refillable welded steel cylinders for LPG — Alternative design and construction  64pages
 
BSI BS EN 14682 2014.12.31 Safety of childrens clothing - Cords and drawstrings on childrens clothing - Specifications  42pages
 
BSI BS EN 15207 2014.12.31 Tanks for transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage  18pages
 
BSI BS ISO 9362 2014.12.31 Banking - Banking telecommunication messages - Business identifier code (BIC)  16pages
 
BSI BS EN 15571 2014.12.31 Machines and plants for mining and tooling of natural stone — Safety — Requirements for surface finishing machines  50pages
 
BSI BS EN 6059-502 2014.12.31 Aerospace series - Electrical cables, installation - protection sleeves - Test methods Part 502: Resistance to electrical arcs  16pages
 
BSI BS EN 16273 2014.12.31 Railway applications — Track — Forged rail transitions  42pages
 
BSI BS EN 16489-2 2014.12.31 Professional indoor UV exposure services Part 2: Required qualification and competence of the indoor UV exposure consultant  14pages
 
BSI BS EN 16489-3 2014.12.31 Professional indoor UV exposure services Part 3: Requirements for the provision of services  14pages
 
BSI BS EN 16564 2014.12.31 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions  58pages
 
BSI BS EN 16576 2014.12.31 Automotive fuels — Determination of manganese and iron content in diesel — Inductively coupled plasma optical emission spectrometry (ICP OES) method  16pages
 
BSI BS EN 16644 2014.12.31 Pumps — Rotodynamic pumps — Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations — Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise  30pages
 
BSI BS EN 15467 2014.12.31 Food processing machinery — Fish heading and filleting machines — Safety and hygiene requirements  38pages
 
BSI BS EN 442-1 2014.12.31 Radiators and convectors Part 1: Technical specifications and requirements  42pages
 
BSI PD ISO/TS 28560-4 2014.12.31 Information and documentation — RFID in libraries Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory  66pages
 
BSI BS 3S 98 2014.12.31 Specification for 2.5% nickel-chromium-molybdenum (high carbon) steel billets, bars, forgings and parts (1 160 – 1 310 MPa: limiting ruling section 155 mm)  12pages
 
BSI BS 1139-6 2014.12.31 Metal scaffolding – Part 6: Prefabricated tower scaffolds outside the scope of BS EN 1004, but utilizing components from such systems – Specification  34pages
 
BSI BS 1710 2014.12.31 Specification for identification of pipelines and services  26pages
 
BSI BS 3288-1 2014.12.31 Insulator and Conductor Fittings for Overhead Power Lines Part 1: Performance and General Requirements  36pages
 
BSI BS 5410-1 2014.12.31 Code of Practice for Oil Firing Part 1: Installations up to 45 kW Output Capacity for Space Heating and Hot Water Supply Purposes  66pages

BSI BS EN 13060 2014.12.31 Small steam sterilizers  84pages
 
BSI BS EN 54-31 2014.12.31 Fire detection and fire alarm system Part 31: Multi-sensor fire detectors — Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors  118pages
 
BSI BS EN 12966 2014.12.31 Road vertical signs — Variable message traffic signs  132pages
 
BSI BS EN 442-2 2014.12.31 Radiators and Convectors Part 2: Test Methods and Rating  82pages
 
BSI BS EN 564 2014.12.31 Mountaineering equipment - Accessory cord - Safety requirements and test methods  14pages
 
BSI BS EN 3545-007 2014.12.31 Aerospace series — Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures — 55 °C to 175 °C Part 007: Cable clamp — Product standard  14pages
 
BSI BS EN 4826 2014.12.31 Aerospace series — Zinc-Nickel (12-16 % Ni) plating of steels with specified tensile strength ≤ 1450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners  18pages
 
BSI BS EN 6059-308 2014.12.31 Aerospace series — Electrical cables, installation — Protection sleeves — Test methods Part 308: Rapid change of temperature  10pages
 
BSI BS EN 60793-1-20 2014.12.31 Optical Fibres Part 1-20: Measurement Methods and Test Procedures - Fibre Geometry  48pages
 
BSI BS 8605-1 2014.12.31 External timber cladding Part 1: Method of specifying  66pages
 
BSI BS ISO 7967-12 2014.12.31 Reciprocating internal combustion engines — Vocabulary of components and systems Part 12: Exhaust emission control systems  18pages
 
BSI BS EN 50290-4-2 2014.12.31 Communication cables Part 4-2: General considerations for the use of cables - Guide to use  34pages
 
BSI BS ISO 2005 2014.12.31 Rubber latex, natural, concentrate — Determination of sludge content  14pages
 
BSI BS ISO 5667-14 2014.12.31 Water quality — Sampling Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling  46pages
 
BSI BS ISO 5794-2 2014.12.31 Rubber compounding ingredients — Silica, precipitated, hydrated Part 2: Evaluation procedures in styrenebutadiene rubber  14pages
 
BSI BS ISO 6460-2 2014.12.31 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions  82pages
 
BSI BS ISO 7176-8 2014.12.31 Wheelchairs Part 8: Requirements and Test Methods for Static, Impact and Fatigue Strengths  80pages
 
BSI BS EN ISO 19901-3 2014.12.31 Petroleum and natural gas industries - Specific requirements for offshore structures Part 3: Topsides structure  130pages
 
BSI BS ISO 7967-11 2014.12.31 Reciprocating internal combustion engines — Vocabulary of components and systems Part 11: Fuel systems  32pages
 
BSI BS EN ISO 19065-1 2014.12.31 Plastics — Acrylonitrilestyrene- acrylate (ASA), acrylonitrile-(ethylenepropylene- diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Part 1: Designation system and basis for spec 20pages
 
BSI BS ISO 8784-1 2014.12.31 Pulp, paper and board - Microbiological examination Part 1: Enumeration of bacteria and bacterial spores based on disintegration  26pages
 
BSI BS EN 419212-2 2014.12.31 Application Interface for smart cards used as Secure Signature Creation Devices Part 2: Additional services  130pages
 
BSI BS ISO 8828 2014.12.31 Implants for surgery - Guidance on care and handling of orthopaedic implants  18pages
 
BSI BS ISO 9635-5 2014.12.31 Agricultural irrigation equipment - Irrigation valves Part 5: Control valves  22pages
 
BSI BS ISO 10791-7 2014.12.31 Test conditions for machining centres Part 7: Accuracy of finished test pieces  36pages
 
BSI BS ISO 11090-1 2014.12.31 Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy Part 1: Single-column machines (cross-slide table type and fixed-table type)  36pages
 
BSI BS ISO 7967-10 2014.12.31 Reciprocating internal combustion engines — Vocabulary of components and systems Part 10: Ignition systems  20pages
 
BSI BS EN ISO 5530-1 2014.12.31 Wheat flour — Physical characteristics of doughs Part 1: Determination of water absorption and rheological properties using a farinograph  36pages
 
BSI BS ISO 11090-2 2014.12.31 Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy Part 2: Double-column machines (slide-head type)  34pages
 
BSI BS EN 61158-6-23 2014.12.31 Industrial communication networks - Fieldbus specifications Part 6-23: Application layer protocol specification - Type 23 elements  218pages
 
BSI BS EN 61169-49 2014.12.31 Radio-frequency connectors Part 49: Sectional specification for SMAA series R.F connectors  28pages
 
BSI BS EN 61300-3-14 2014.12.31 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures Part 3-14: Examinations and measurements — Error and repeatability of the attenuation settings of a variable optical attenuator  16pages
 
BSI BS EN 61300-3-51 2014.12.31 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures Part 3-51: Examinations and measurements — Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors  22pages
 
BSI BS EN 62196-3 2014.12.31 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers  20pages
 
BSI BS ISO 675 2014.12.31 Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point  14pages
 
BSI BS EN 419212-1 2014.12.31 Application Interface for smart cards used as Secure Signature Creation Devices Part 1: Basic services  254pages
 
BSI BS EN 60034-19 2014.12.31 Rotating electrical machines Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies  24pages
 
BSI BS EN ISO 10239 2014.12.31 Small craft - Liquefied petroleum gas (LPG) systems  28pages
 
BSI BS EN ISO 13297 2014.12.31 Small Craft - Electrical Systems - Alternating Current Installations  36pages
 
BSI BS EN ISO 16119-4 2014.12.31 Agricultural and forestry machinery — Environmental requirements for sprayers Part 4: Fixed and semi-mobile sprayers  30pages
 
BSI BS EN ISO 17892-1 2014.12.31 Geotechnical investigation and testing — Laboratory testing of soil Part 1: Determination of water content  22pages
 
BSI BS EN ISO 17892-2 2014.12.31 Geotechnical investigation and testing — Laboratory testing of soil Part 2: Determination of bulk density  26pages
 
BSI BS EN ISO 18064 2014.12.31 Thermoplastic elastomers - Nomenclature and abbreviated terms  16pages
 
BSI BS EN 62353 2014.12.31 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment  66pages
 
BSI BIP 0008-1 2014.12.19 Evidential Weight and Legal Admissibility of Information Stored Electronically. Code of Practice for the Implementation of BS 10008 - Hardcopy Only - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide  0pages
 
BSI BIP 0008-2 2014.12.19 Evidential Weight and Legal Admissibility of Information Communicated Electronically. Code of Practice for the Implementation of BS 10008 - Hardcopy Only - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide  0pages
 
BSI BIP 0008-3 2014.12.19 Evidential Weight and Legal Admissibility of Linking Electronic Identity to Documents. Code of Practice for the Implementation of BS 10008 - Hardcopy Only - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide  0pages
 
BSI BS 10008 2014.12.08 Evidential weight and legal admissibility of electronic information - Specification  36pages
 
BSI BS 8571 2014.12.01 Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens  28pages
 
BSI BIP 0142 2014.12.01 Evidential Weight and Legal Admissibility Collection - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide  0pages
 
BSI BS EN 12377 2014.11.30 Packaging - Flexible Tubes - Test Method for the Air Tightness of Closures  10pages
 
BSI BS EN 16272-6 2014.11.30 Railway applications — Track — Noise barriers and related devices acting on airborne sound propagation — Test method for determining the acoustic performance Part 6: Intrinsic characteristics — In situ values of airborne sound insulation under 50pages
 
BSI BS EN 15348 2014.11.30 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates  24pages
 
BSI BS EN 15346 2014.11.30 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates  30pages
 
BSI BS EN 15180 2014.11.30 Food processing machinery - Food depositors - Safety and hygiene requirements  56pages
 
BSI BS EN 15165 2014.11.30 Food processing machinery — Forming machines — Safety and hygiene requirements  56pages
 
BSI BS EN 13757-1 2014.11.30 Communication systems for meters Part 1: Data exchange  146pages
 
BSI BS EN 12268 2014.11.30 Food processing machinery - Band saw machines - Safety and hygiene requirements  46pages
 
BSI BS EN 12463 2014.11.30 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements  66pages
 
BSI BS ISO 11662-2 2014.11.30 Mobile cranes - Experimental determination of crane performance Part 2: Structural competence under static loading  52pages
 
BSI BS EN 3475-411 2014.11.30 Aerospace series — Cables, electrical, aircraft use — Test methods Part 411: Resistance to fluids  12pages
 
BSI BS EN 16593 2014.11.30 Packaging — Rigid plastic containers — PET finish BVS 30H60  16pages
 
BSI BS ISO 18418-2 2014.11.30 Gasoline engines — Medium pressure liquid fuel supply connections Part 2: Pipe assemblies  18pages
 
BSI BS EN 4725 2014.11.30 Aerospace series — Aluminium alloy AL-P2024- Al Cu4Mg1 — T351 — Plate — 6 mm < a ≤ 150 mm  12pages
 
BSI BS EN 4686 2014.11.30 Aerospace series — Pipe coupling 8°30 in titanium alloy — Equipped blind ferrules  12pages
 
BSI BS EN 4199-004 2014.11.30 Aerospace series — Bonding straps for aircraft Part 004: Round bonding straps, copper, tin plated -65 °C up to 150 °C and nickel plated -65 °C up to 260 °C — Product Standard  18pages
 
BSI BS ISO 18560-1 2014.11.30 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment Part 1: Removal of formaldehyde  26pages
 
BSI BS ISO 10161-2 2014.11.30 Information and Documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification Part 2: Protocol Implementation Conformance Statement (PICS) Proforma  46pages
 
BSI BS EN 61753-031-6 2014.11.30 Fibre optic interconnecting devices and passive components — Performance standard Part 031- 6: Non-connectorised single-mode 1×N and 2×N non-wavelength-selective branching devices for Category O — Uncontrolled environment  26pages
 
BSI BS EN 16602-70-29 2014.11.30 Space product assurance — Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment  26pages
 
BSI BS EN 16602-70-26 2014.11.30 Space product assurance — Crimping of high-reliability electrical connections  44pages
 
BSI BS EN 16602-70-22 2014.11.30 Space product assurance — Control of limited shelf-life materials  18pages
 
BSI BS EN 16602-70-21 2014.11.30 Space product assurance — Flammability testing for the screening of space materials  52pages
 
BSI BS EN 16602-70-20 2014.11.30 Space product assurance — Determination of the susceptibility of silver-plated copper wire and cable to "redplague" corrosion  30pages
 
BSI BS EN 16556 2014.11.30 Determination of the maximum open time for thermoplastic wood adhesives for nonstructural applications  14pages
 
BSI BS ISO 23205 2014.11.30 Agricultural tractors - Instructional seat  14pages
 
BSI BS EN 16397-1 2014.11.30 Flexible couplings Part 1: Performance requirements  20pages
 
BSI BS ISO 20507 2014.11.30 Fine ceramics (advanced ceramics, advanced technical ceramics) — Vocabulary  42pages
 
BSI BS ISO 11427 2014.11.30 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide  16pages
 
BSI BS EN 16594 2014.11.30 Packaging - Rigid plastic containers - PET finish 26/22 (12,0)  12pages
 
BSI BS EN 3155-071 2014.11.30 Aerospace series - Electrical contacts used in elements of connection Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard  16pages
 
BSI BS EN 16592 2014.11.30 Packaging — Rigid plastic containers — PET finish 29/25 (12,6)  14pages
 
BSI BS EN 3155-081 2014.11.30 Aerospace series — Electrical contacts used in elements of connection Part 081: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class T — Product standard  14pages
 
BSI BS EN 16397-2 2014.11.30 Flexible couplings Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes  36pages
 
BSI BS EN 16602-70-18 2014.11.30 Space product assurance — Preparation, assembly and mounting of RF coaxial cables  46pages
 
BSI BS ISO 16494 2014.11.30 Heat recovery ventilators and energy recovery ventilators — Method of test for performance  48pages
 
BSI BS ISO 14960-1 2014.11.30 Tubeless tyres — Valves and components Part 1: Test methods  20pages
 
BSI BS ISO 14886 2014.11.30 Ships and marine technology — Large yachts — Structural fire protection for FRP yachts  24pages
 
BSI BS ISO 14960-2 2014.11.30 Tubeless tyres — Valves and components Part 2: Clamp-in tubeless tyre valve-test method  16pages
 
BSI BS ISO 14132-3 2014.11.30 Optics and photonics — Vocabulary for telescopic systems Part 3: Terms for telescopic sights  14pages
 
BSI BS ISO 15819 2014.11.30 Cosmetics - Analytical methods - Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS  22pages
 
BSI BS ISO 13547-2 2014.11.30 Copper, lead, zinc and nickel sulfide concentrates — Determination of arsenic Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method  22pages
 
BSI BS EN 3155-079 2014.11.30 Aerospace series — Electrical contacts used in elements of connection Part 079: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S — Product standard  14pages
 
BSI BS ISO 13209-2 2014.11.30 Road vehicles — Open Test sequence eXchange format (OTX) Part 2: Core data model specification and requirements  216pages
 
BSI BS ISO 16000-20 2014.11.30 Indoor air Part 20: Detection and enumeration of moulds - Determination of total spore count  24pages
 
BSI BS ISO 13050 2014.11.30 Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys  62pages
 
BSI BS ISO 16845-2 2014.11.30 Road vehicles — Controller area network (CAN) conformance test plan Part 2: High-speed medium access unit with selective wake-up functionality  116pages
 
BSI BS ISO 11495 2014.11.30 Jewellery — Determination of palladium in palladium jewellery alloys — ICP-OES method using yttrium as internal standard element  20pages
 
BSI BS ISO 11494 2014.11.30 Jewellery - Determination of platinum in platinum jewellery alloys - ICP-OES method using yttrium as internal standard element  20pages
 
BSI BS ISO 11346 2014.11.30 Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use  22pages
 

分享到:
或许你还对下面的文章感兴趣
最新文章
最热关注
本月排行
Copyright 2000-2020 标准信息网. Some Rights Reserved | DESIGN BY [A]