AFNOR NF 法国标准目录 2014-1-2
AFNOR NF EN 61249-4-1 2014.02.01 Materials for printed boards and other interconnecting structures - Part 4-1 : sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability
AFNOR NF EN 50551-2 2014.02.01 Simplex and duplex cables to be used for cords - Part 2 : detailed specification and minimum requirements for a 3,0 mm simplex ruggedized single mode fibre cable to be used for patchcord/cords category U
AFNOR NF EN 61249-4-14 2014.02.01 Materials for printed boards and other interconnecting structures - Part 4-14 : sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (verti
AFNOR NF EN 61249-4-15 2014.02.01 Materials for printed boards and other interconnecting structures - Part 4-15 : sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined fla
AFNOR NF EN ISO 10581 2014.02.01 Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications
AFNOR NF EN 61249-4-16 2014.02.01 Materials for printed boards and other interconnecting structures - Part 4-16 : sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepre
AFNOR NF EN 61249-4-17 2014.02.01 Materials for printed boards and other interconnecting structures - Part 4-17 : sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined fla
AFNOR NF EN 61514-2 2014.02.01 Industrial process control systems - Part 2 : methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
AFNOR NF EN 300440-2 2014.02.01 Electromagnetic compatibility and radio spectrum matters (ERM) - Short range devices - Radio equipment to be usedin the 1 GHz to 40 GHz frequency range - Part 2 : harmonized EN covering essential requirements of article 3.2 of the R&TTE Di
AFNOR NF X50-843 2014.02.01 Wellness spas - Design, operation, wellness and/or beauty care provision and staff competence
AFNOR NF EN 300175-1 2014.02.01 Digital Enhanced Cordless Telecommunications (DECT) - common interface (CI) - Part 1 : overview (V2.5.1)
AFNOR NF EN 300175-6 2014.02.01 Digital Enhanced Cordless Telecommunications (DECT) - common interface (CI) - Part 6 : identities and addressing (V2.5.1)
AFNOR NF EN 4595 2014.02.01 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance
AFNOR NF ISO 16000-21 2014.02.01 Indoor air - Part 21 : detection and enumeration of moulds - Sampling from materials
AFNOR NF EN 300175-5 2014.02.01 Digital Enhanced Cordless Telecommunications (DECT) - common interface (CI) - Part 5 : network (NWK) layer (V2.5.1)
AFNOR NF EN 300175-4 2014.02.01 Digital Enhanced Cordless Telecommunications (DECT) - common interface (CI) - Part 4 : data link control (DLC) layer (V2.5.1)
AFNOR NF EN 4594 2014.02.01 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance
AFNOR NF EN 300175-8 2014.02.01 Digital Enhanced Cordless Telecommunications (DECT) - common interface (CI) - Part 8 : speech and audio coding and transmission (V2.5.1)
AFNOR NF EN 50413/A1 2014.02.01 Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
AFNOR NF EN 300175-7 2014.02.01 Digital Enhanced Cordless Telecommunications (DECT) - common interface (CI) - Part 7 : security features (V2.5.1)
AFNOR NF EN 599-1/IN1 2014.01.25 Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1 : specification according to use class
AFNOR NF ISO 7176-11 2014.01.25 Wheelchairs - Part 11 : test dummies
AFNOR NF ISO 8791-2 2014.01.25 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 2 : Bendtsen method
AFNOR NF S61-939-1 2014.01.25 Fire Safety Systems - Pneumatic Power Supplies as Safety Devices - Part 1 : single use compressed carbon dioxide bottle
AFNOR NF ISO 3338-2 2014.01.25 Cylindrical shanks for milling cutters - Part 2 : dimensional characteristics of flatted cylindrical shanks
AFNOR NF EN ISO 9235 2014.01.25 Aromatic natural raw materials - Vocabulary
AFNOR NF EN 599-1+A1 2014.01.25 Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1 : specification according to use class
AFNOR NF EN 1300 2014.01.25 Secure storage units - Classification for high security locks according to their resistance to unauthorized opening
AFNOR NF ISO 10225 2014.01.25 Gas welding equipment - Marking for equipment used for gas welding, cutting and allied processes
AFNOR NF EN ISO 15548-2 2014.01.25 Non-destructive testing - Equipment for eddy current examination - Part 2 : probe characteristics and verification
AFNOR NF ISO 13164-1 2014.01.25 Water quality - Radon-222 - Part 1 : general principles
AFNOR NF EN 1999-1-1/A2 2014.01.25 Eurocode 9 : design of aluminium structures - Part 1-1 : general structural rules
AFNOR NF P15-319 2014.01.25 Hydraulic binders - Cements for works using waters with high sulfate content
AFNOR NF EN 590 2014.01.25 Automotive fuels - Diesel - Requirements and test methods
AFNOR NF EN 16081+A1 2014.01.25 Hyperbaric chambers - Specific requirements for fire extinguishing systems - Performance, installation and testing
AFNOR NF EN ISO 15548-1 2014.01.25 Non-destructive testing - Equipment for eddy current examination - Part 1 : instrument characteristics and verification
AFNOR NF EN 16081/IN1 2014.01.25 Hyperbaric chambers - Specific requirements for fire extinguishing systems - Performance, installation and testing
AFNOR NF ISO 15923-1 2014.01.25 Water quality - Determination of selected parameters by discrete analysis systems - Part 1 : ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection
AFNOR NF ISO 27427 2014.01.25 Anaesthetic and respiratory equipment - Nebulizing systems and components
AFNOR NF EN 16409 2014.01.25 Chemicals used for treatment of water for human consumption - Dolomitic lime
AFNOR NF EN 16381 2014.01.25 Chemicals used for treatment of swimming pool water - Sodium peroxodisulfate
AFNOR NF ISO 8243 2014.01.25 Cigarettes - Sampling
AFNOR NF ISO 883 2014.01.25 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole - Dimensions
AFNOR FD U42-412 2014.01.22 Fertilizers - Liming materials, liming materials-fertilizers and fertilizers - Determination of the crushing strength
AFNOR NF EN 15649-1/IN2 2014.01.18 Floating leisure articles for use on and in the water - Part 1 : classification, materials, general requirements and test methods
AFNOR NF EN 15649-6+A1 2014.01.18 Floating leisure articles for use on and in the water - Part 6 : additional specific safety requirements and test methods for Class D devices
AFNOR NF EN 60598-2-11 2014.01.18 Luminaires - Part 2-11 : particular requirements - Aquarium luminaires
AFNOR NF EN 62271-4 2014.01.18 High-voltage switchgear and controlgear - Part 4 : handling procedures for sulphur hexafluoride (SF6) and its mixtures
AFNOR NF EN 15649-1+A2 2014.01.18 Floating leisure articles for use on and in the water - Part 1 : classification, materials, general requirements and test methods
AFNOR NF EN ISO 22282-6 2014.01.18 Geotechnical investigation and testing - Geohydraulic testing - Part 6 : water permeability tests in a borehole using closed systems
AFNOR NF EN ISO 22282-4 2014.01.18 Geotechnical investigation and testing - Geohydraulic testing - Part 4 : pumping tests
AFNOR NF EN ISO 22282-2 2014.01.18 Geotechnical investigation and testing - Geohydraulic testing - Part 2 : water permeability tests in a borehole using open systems
AFNOR NF EN ISO 22282-1 2014.01.18 Geotechnical investigation and testing - Geohydraulic testing - Part 1 : general rules
AFNOR NF EN 62271-112 2014.01.18 High-voltage switchgear and controlgear - Part 112 : alternating current high-speed earthing switches for secondary arc extinction on transmission lines
AFNOR NF EN 60950-1/A2 2014.01.18 Information technology equipment - Safety - Part 1 : general requirements
AFNOR NF EN ISO 22282-5 2014.01.18 Geotechnical investigation and testing - Geohydraulic testing - Part 5 : Infiltrometer tests
AFNOR NF EN 15101-1 2014.01.18 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1 : specification for the products before installation
AFNOR NF EN 60252-2/A1 2014.01.18 AC motor capacitors - Part 2 : motor start capacitors
AFNOR NF EN 15091 2014.01.18 Sanitary tapware - Electronic opening and closing sanitary tapware
AFNOR NF EN 60793-2-30 2014.01.18 Optical fibres - Part 2-30 : product specifications - Sectional specification for category A3 multimode fibres
AFNOR NF EN 60743 2014.01.18 Live working - Terminology for tools, devices and equipment
AFNOR NF EN 60793-1-54 2014.01.18 Optical fibres - Part 1-54 : measurement methods and test procedures - Gamma irradiation
AFNOR NF EN 118 2014.01.18 Wood preservatives - Determination of preventive action against reticulitermes species (european termites) (laboratory method)
AFNOR NF EN 10049 2014.01.18 Measurement of roughness average Ra and peak count RPc on metallic flat products
AFNOR NF EN ISO 18365 2014.01.18 Hydrometry - Selection, establishment and operation of a gauging station
AFNOR NF EN 1012-3 2014.01.18 Compressors and vaccum pumps - Safety requirements - Part 3 : process compressors
AFNOR NF ISO 16578 2014.01.18 Molecular biomarker analysis - General definitions and requirements for microarray detection of specific nucleic acid sequences
AFNOR NF EN ISO 22282-3 2014.01.18 Geotechnical investigation and testing - Geohydraulic testing - Part 3 : water pressure tests in rock
AFNOR NF ISO/CEI 27002 2014.01.18 Information technology - Security techniques - Code of practice for information security controls
AFNOR NF EN 15649-6/IN1 2014.01.18 Floating leisure articles for use on and in the water - Part 6 : additional specific safety requirements and test methods for Class D devices
AFNOR NF Z44-022 2014.01.18 MODENA - Modelization of data exchange for archiving
AFNOR NF EN 60252-1/A1 2014.01.18 AC motor capacitors - Part 1 : general - Performance, testing and rating - Safety requirements - Guidance for installation and operation
AFNOR NF EN 50386/A1 2014.01.18 Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
AFNOR NF T75-401 2014.01.18 Essentials oils - Analysis by gas chromatography on capillary column - General method
AFNOR NF EN 13999-1 2014.01.18 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1 : general procedure
AFNOR NF EN 13999-2 2014.01.18 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2 : determination of volatile organic compounds
AFNOR NF EN 16400 2014.01.18 Chemicals used for treatment of swimming pool water - Hydrogen peroxide
AFNOR NF EN 62606 2014.01.18 General requirements for arc fault detection devices
AFNOR NF EN 16240 2014.01.18 Light transmitting flat solid polycarbonate (PC) sheets for internal and external roofs, walls and ceilings - Requirements and test methods
AFNOR NF EN 10211 2014.01.18 Chemical analysis of ferrous materials - Determination of titanium in steels and cast irons - Flame atomic absorption spectrometric method
AFNOR FD X50-272 2014.01.15 Management of innovation - Guidelines for the implementation of the open innovation approach
AFNOR NF C60-200-2 2014.01.11 Low-voltage fuses - Part 2 : supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
AFNOR NF U42-001/A11 2014.01.11 Fertilizers - Types and specifications
AFNOR NF EN 40-3-2 2014.01.11 Lighting columns - Part 3-2 : design and verification - Verification by testing
AFNOR NF EN 40-3-1 2014.01.11 Lighting columns - Part 3-1 : design and verification - specification for characteristic loads
AFNOR NF EN 40-3-3 2014.01.11 Lighting columns - Part 3-3 : design and verification - verification by calculation
AFNOR NF EN 16318 2014.01.11 Fertilizers - Determination of trace elements - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
AFNOR NF EN ISO 3452-3 2014.01.11 Non-destructive testing - Penetrant testing - Part 3 : reference test blocks
AFNOR NF EN 12811-4 2014.01.11 Temporary works equipment - Part 4 : protection fans for scaffolds - Performance requirements and product design
AFNOR NF EN ISO 3452-2 2014.01.11 Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials
AFNOR NF EN 16399 2014.01.11 Chemicals used for treatment of swimming pool water - Sodium thiosulfate
AFNOR NF EN 16380 2014.01.11 Chemicals used for treatment of swimming pool water - Potassium peroxomonosulfate
AFNOR NF EN ISO 16474-3 2014.01.11 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps
AFNOR NF EN 16319 2014.01.11 Fertilizers - Determination of trace elements - Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution
AFNOR NF EN ISO 5579 2014.01.11 Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
AFNOR NF EN 60851-3/A1 2014.01.11 Winding wires - Test methods - Part 3 : mechanical properties
AFNOR NF ISO 13163 2014.01.11 Water quality - Lead 210 - Test method using liquid scintillation counting
AFNOR NF ISO 10649-4 2014.01.11 Cutter arbors with parallel key and tenon drive - Part 4 : dimensions and designation of tool holders with 7/24 taper without automatic tool changer
AFNOR NF ISO 10649-3 2014.01.11 Cutter arbors with parallel key and tenon drive - Part 3 : dimensions and designation of tool holders with 7/24 taper for automatic tool changer
AFNOR NF ISO 10649-2 2014.01.11 Cutter arbors with parrallel key and tenon drive - Part 2 : dimensions and designation of tool holders with taper interface with flange contact surface
AFNOR NF ISO 10649-1 2014.01.11 Cutter arbors with parallel key and tenon drive - Part 1 : general dimensions
AFNOR NF ISO 16729 2014.01.11 Soil quality - Digestion of nitric acid soluble fractions of elements
AFNOR NF EN ISO 16474-1 2014.01.11 Paints and vanishes - Methods of exposure to laboratory light sources - Part 1 : general guidance
AFNOR NF EN 62056-9-7 2014.01.11 Electricity metering data exchange - The DLMS/COSEM suite - Part 9-7 : communication profile for TCP-UDP/IP networks
AFNOR NF EN 936 2014.01.11 Chemicals used for treatment of water intended for human consumption - Carbon dioxide
AFNOR NF EN 374-4 2014.01.11 Protective gloves against chemicals and micro-organisms - Part 4 : determination of resistance to degradation by chemicals
AFNOR NF EN ISO 20483 2014.01.11 Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method
AFNOR NF EN 61970-301 2014.01.11 Energy management system application program interface (EMS-API) - Part 301 : common information model (CIM) base
AFNOR NF ISO 7206-6 2014.01.11 Implants for surgery - Partial and total hip joint prostheses - Part 6 : endurance properties testing and performance requirements of neck region of stemmed femoral components
AFNOR NF EN ISO 17249 2014.01.11 Safety footwear with resistance to chain saw cutting
AFNOR NF EN ISO 16474-2 2014.01.11 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2 : xenon-arc lamps
AFNOR NF EN 60947-7-4 2014.01.11 Low-voltage switchgear and controlgear - Part 7-4 : ancillary equipment - PCB terminal blocks for copper conductors
AFNOR NF EN 16121 2014.01.11 Non-domestic storage furniture - Requirements for safety, strength, durability and stability
AFNOR FD ISO/TR 16335 2014.01.08 Corrosion of metals and alloys - Corrosion tests in artificial atmospheres - Guidelines for selection of accelerated corrosion test for product qualification
AFNOR FD CEN/TR 16626 2014.01.08 Vitrified clay pipe systems for frains and sewers - Guidance for voluntary third-party certification procedures
AFNOR FD CEN/TR 16625 2014.01.08 Flexible sheets for waterproofing - Statistical definition of manufacturers limiting value and declared value (MLV and MDV) - 95 % Statistic
AFNOR FD CEN/TR 16596 2014.01.08 Electric-electronic interface between chassis-cab and bodywork of refuse collection vehicles (RCVs)
AFNOR FD ISO/TR 10686 2014.01.08 Hydraulic fluid power - Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
AFNOR FD V18-300 2014.01.08 Oilseed meals and animal feeding stuffs - Comparison of methods for the analysis of fats in oilseed meals
AFNOR BP P96-104 2014.01.08 Accessibility for disabled people - Location and direction signaling systems into public access buildings
AFNOR FD X50-259 2014.01.08 Risk management - Business continuity plan - Implementation and maintenance procedure
AFNOR XP ISO/TS 16976-5 2014.01.08 Respiratory protective devices - Human factors - Part 5 : thermal effects
AFNOR NF EN ISO 9806 2014.01.04 Solar energy - Solar thermal collectors - Test methods
AFNOR NF EN 13707 2014.01.04 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics
AFNOR NF ISO 17049 2014.01.04 Accessible design - Application of braille on signage, equipment and appliances
AFNOR NF EN 15051-1 2014.01.04 Workplace exposure - Measurement of dustiness of bulk materials - Part 1 : requirements and choice of test methods
AFNOR NF EN 15051-2 2014.01.04 Workplace exposure - Measurement of the dustiness of bulk materials - Part 2 : rotating drum method
AFNOR NF ISO 16303 2014.01.04 Water quality - Determination of toxicity of fresh water sediments using Hyalella azteca
AFNOR NF ISO 27850 2014.01.04 Tractors for agriculture and forestry - Falling object protective structures - Test procedures and performance requirements
AFNOR NF ISO 7176-16 2014.01.04 Wheelchairs - Part 16 : resistance to ignition of postural support devices
AFNOR NF EN 1948-4/IN1 2014.01.04 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
AFNOR NF EN 61968-11 2014.01.04 Application integration at electric utilities - System interfaces for distribution management - Part 11 : common information model (CIM) extensions for distribution
AFNOR NF EN ISO 11064-4 2014.01.04 Ergonomic design of control centres - Part 4 : layout and dimensions of workstations
AFNOR NF EN ISO 1179-2 2014.01.04 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2 : heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
AFNOR NF EN ISO 1179-1 2014.01.04 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1 : threaded ports
AFNOR NF EN ISO 306 2014.01.04 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
AFNOR NF EN 1097-6 2014.01.04 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
AFNOR NF EN 1870-19 2014.01.04 Safety of woodworking machines - Circular sawing machines - Part 19 : circular saw benches (with and without sliding table) and building site saws
AFNOR NF EN 1948-4+A1 2014.01.04 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
AFNOR NF EN 15051-3 2014.01.04 Workplace exposure - Measurement of the dustiness of bulk materials - Part 3 : continuous drop method
AFNOR NF ISO 9841 2014.01.04 Essential oil of hyssop (Hyssopus officinalis L. ssp officinalis)
AFNOR NF EN 60721-2-2 2013.12.27 Classification of environmental conditions - Part 2-2 : environmental conditions appearing in nature - Precipitation and wind
AFNOR NF EN 12720+A1 2013.12.27 Furniture - Assessment of surface resistance to cold liquids
AFNOR NF EN 12720/IN1 2013.12.27 Furniture - Assessment of surface resistance to cold liquids
AFNOR NF M58-003 2013.12.27 Installation of hydrogen-related systems
AFNOR NF EN 60695-9-1 2013.12.27 Fire hazard testing - Part 9-1 : surface spread of flame - General guidance
AFNOR NF EN 61280-1-3 2013.12.27 Fibre optic communication subsystem test procedures - Part 1-3 : general communication subsystems - Central wavelength and spectral width measurement
AFNOR NF EN 62703 2013.12.27 Expression of performance of fluorometric oxygen analyzers in liquid media
AFNOR NF EN ISO 9606-1 2013.12.27 Qualification testing of welders - Fusion welding - Part 1 : steels
AFNOR NF EN ISO 11816-1 2013.12.27 Milk and milk products - Determination of alkaline phosphatase activity - Part 1 : fluorimetric method for milk and milk-based drinks
AFNOR NF EN ISO 13734 2013.12.27 Natural gas - Organic components used as odorants - Requirements and test methods
AFNOR NF EN 61076-3-104 2013.12.27 Connectors for electronic equipment - Product requirements - Part 3-104 : detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1 000 MHz
AFNOR NF ISO/CEI 27001 2013.12.27 Information technology - Security techniques - Information security management systems - Requirements
AFNOR NF EN 61029-2-10/A11 2013.12.27 Safety of transportable motor-operated electric tools - Part 2-10 : particular requirements for cutting-off grinders
AFNOR NF E01-005 2013.12.27 Mechanical products - Methodology for reduction of environmental impacts in product design and development
AFNOR NF A88-941 2013.12.27 Welding and allied processes - Qualification test of welders for safety joints on fuel gas distribution pipework - Joining of fuel gas pipework in fuel gas plants located downstream of the general cut-off device
AFNOR NF P98-772-1 2013.12.27 Road construction and maintenance equipment - Data acquisition module for granular mixture production plants - Description and functional requirements - Part 1 : module for continuous production
AFNOR NF P98-772-2 2013.12.27 Road construction and maintenance equipment - Data acquisition module for granular mixture production plants - Description and functional requirements - Part 2 : module for discontinuous production
AFNOR NF X50-760 2013.12.27 Vocational training - Essential information on the training offer - Clarity of the training offer
AFNOR NF X50-768 2013.12.27 Vocational training - Realisation process of a training operation - Assessment of training
AFNOR NF ISO 5985 2013.12.27 Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid
AFNOR NF Z99-005 2013.12.27 Digital description and data exchange of industrial components
AFNOR NF EN 12722/IN1 2013.12.27 Furniture - Assessment of surface resistance to dry heat
AFNOR NF EN 13278 2013.12.27 Open fronted gas-fired independent space heaters
AFNOR NF EN 13402-3 2013.12.27 Size designation of clothes - Part 3 : body measurements and intervals
AFNOR NF EN 13727+A1 2013.12.27 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity in the medical area - Test method and requirements (phase 2, step 1)
AFNOR NF EN 13727/IN1 2013.12.27 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity in the medical area - Test method and requirements (phase 2, step 1)
AFNOR NF EN 61169-35 2013.12.27 Radio-frequency connectors - Part 35 : sectional specification for 2,92 series RF connectors
AFNOR NF EN 14471 2013.12.27 Chimneys - System chimneys with plastic flue liners - Requirements and test methods
AFNOR NF EN 12722+A1 2013.12.27 Furniture - Assessment of surface resistance to dry heat
AFNOR NF EN 15664-1+A1 2013.12.27 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1 : design and operation
AFNOR NF EN 15664-1/IN1 2013.12.27 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1 : design and operation
AFNOR NF EN 50355 2013.12.27 Railway applications - Railway rolling stock cables having special fire performance - Guide to use
AFNOR NF EN 60068-2-57 2013.12.27 Environmental testing - Part 2-57 : tests - Test Ff : vibration - Time-history and sine-beat method
AFNOR NF EN 60598-2-24 2013.12.27 Luminaires - Part 2-24 : particular requirements - Luminaires with limited surface temperatures
AFNOR NF EN 60695-11-10 2013.12.27 Fire hazard testing - Part 11-10 : test flames - 50 W horizontal and vertical flame test methods
AFNOR NF EN 61010-2-201 2013.12.27 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201 : particular requirements for control equipment
AFNOR NF EN 14067-4 2013.12.27 Railway applications - Aerodynamics - Part 4 : requirements and test procedures for aerodynamics on open track
AFNOR NF EN 336 2013.12.20 Structural timber - Sizes, permitted deviations
AFNOR NF M88-779 2013.12.20 Installations for liquid hydrocarbons - Pressure regulators and automatic change-over devices for domestic butane- and propane-gas-burning installations having a regulated pressure of 4 bar and a flow rate less or equal to 100 kg/h
AFNOR NF EN 15383+A1 2013.12.20 Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers
AFNOR NF EN ISO 14688-2/A1 2013.12.20 Geotechnical investigation and testing - Identification and classification of soil - Part 2 : principles for a classification - Amendment 1
AFNOR NF EN ISO 17489 2013.12.20 Leather - Chemical tests - Determination of tan content in tanning agents
AFNOR NF EN ISO 18265 2013.12.20 Metallic materials - Conversion of hardness values
AFNOR NF EN ISO 28258 2013.12.20 Soil quality - Digital exchange of soil-related data
AFNOR NF ISO 7388-3 2013.12.20 Tools shanks with 7/24 taper for automatic tool changers - Part 3 : retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
AFNOR NF EN ISO 14113 2013.12.20 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with indutrial gases up to 450 bar (45 MPa)
AFNOR NF ISO 16474-4 2013.12.20 Paints and varnishes - Methods of exposure to laboratory light sources - Part 4 : Open-flame carbon-arc lamps
AFNOR NF EN ISO 10545-9 2013.12.20 Ceramic tiles - Part 9 : determination of resistance to thermal shock
AFNOR NF P90-308 2013.12.20 Protective elements for in-ground, barrier-free, private or collective use swimming pools - Safety covers and securing devices - Safety requirements and test methods
AFNOR NF P98-728-1 2013.12.20 Road construction and maintenance equipment - Hot mix asphalt production facilities - Definition of constituent equipment and characteristics, verification of initial settings - Part 1 : bituminous mixture continuous mode production facilities
AFNOR NF P98-728-2 2013.12.20 Road construction and maintenance equipment - Hot mix asphalt production facilities - Definition of constituent equipment and characteristics, verification of initial settings - Part 2 : bituminous mixture discontinuous mode production facilit
AFNOR NF V03-777 2013.12.20 Cereals and cereal products - Sampling - Simplified routine method
AFNOR NF X30-408 2013.12.20 Household waste - Characterization method - Bulk product analysis
AFNOR NF X30-466 2013.12.20 Household and related refuse - Characterisation method - Dry product analysis
AFNOR NF ISO 14604 2013.12.20 Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for ceramic coatings - Determination of fracture strain
AFNOR NF EN 12622+A1 2013.12.20 Safety of machine tools - Hydraulic press brakes
AFNOR NF EN 1870-11 2013.12.20 Safety of woodworking machines - Circular sawing machines - Part 11 : semi-automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
AFNOR NF EN 1870-12 2013.12.20 Safety of woodworking machines - Circular sawing machines - Part 12 : pendulum cross-cut sawing machines
AFNOR NF EN 1998-1/NA 2013.12.20 Eurocode 8 - Design of structures for earthquake resistance - Part 1 : general rules, seismic actions and rules for buildings - National annex to NF EN 1998-1:2005 - General rules, seismic actions and rules for buildings
- AFNOR NF法国标准目录 2014-2-3(2015-1-14 9:50:3)
- AFNOR NF 法国标准目录 2014-3-4(2015-1-14 9:42:30)
- AFNOR NF 法国标准目录 2014-5(2015-1-14 9:37:50)
- AFNOR NF 法国标准2014-5-6(2015-1-14 9:34:13)
- AFNOR NF 法国标准目录 2014-6(2015-1-14 9:27:18)
- AFNOR NF 法国标准目录 2014-6-7(2015-1-14 9:25:19)
- AFNOR NF 法国标准目录2014-8(2015-1-14 9:23:21)
- AFNOR NF 法国标准目录2014-9(2015-1-14 8:58:51)
- AFNOR NF 法国标准目录2014-10(2015-1-14 8:46:33)
- AFNOR NF 法国标准目录2014-11(2015-1-14 8:41:18)